Rolled Rubber 1/2 Inch 17% Color Cascade per SF
Rolled Rubber Athletic Flooring, Rubber Color Gym Flooring
Top Features for Rolled Rubber 1/2 Inch 17% Color Cascade per SF
- Enviromentally friendly
- Durable long lasting rubber
- FloorScore Certified
- Absorbs shock and sound
- Easy to clean and maintain
- Easy to install
- Works for many application types
- Made in the USA
Workout Area Flooring, Rubber Flooring Gym Floors, Pro Athletic Facility Flooring, Pet Area, Industrial Flooring, Hospitals, Lobbies, Shooting Ranges, Skating Areas, Ski Lodges
1/2 Inch Rolled Rubber flooring is a sustainable, environmentally friendly rubber flooring that is used for many different applications. Some of the most popular applications are home and commercial gyms, industrial floors and pet areas.
The shipping calculator will calculate shipping from Oregon. Contact customer service for best shipping rates nationwide east of the rocky mountains.
This is a rubber flooring roll can be purchase in any roll length from 25 to 200 linear feet. Please note this product is sold in 100 square foot increments.
High quality rubber flooring roll with 17 percent color flecks for weight rooms and professional athletic and gym flooring installations. 1/2 inch thickness is a great option that will standup to all types of stationary exercise equipment.
Use rolls of rubber flooring for home and and commercial gym floors. This type of rubber flooring product is very durable and long lasting. Made from recycled rubber material this flooring option is considered a green product and may contribute to LEED points in green buildings.
Rolled rubber flooring is a popular option in homes, schools and professional gym floors and weight room areas. Rolled rubber is a great product for protecting floors from free weights and exercise equipment. Rubber flooring in rolls will act as a sound dampener and as a floor protector. Rolls of rubber flooring are a low cost resilient rubber flooring option.
Made in the USA from recycled rubber content.
Rubber rolls are relatively easy to install. Lay the rubber rolls directly over concrete, ceramic tile, or any smooth, hard, flat surface. For a wall to wall installation, simply unroll the rubber roll and cut the lengths to fit using a straightedge and a utility knife as needed. Rubber rolls are factory cut with precision so they will lay side-by-side with no gaps between rolls. The ends of the rolls are not cut square and will require trimming during installation.
For installation use double sided floor tape or adhesive to attach the rubber rolls to a clean, hard floor surface. When using a tape down method the rolls should be taped around the perimeter and at the seams. Rubber rolls can be dry laid in small installations under 400 SF.
General Rubber Flooring Information:
Rubber flooring rolls are an economical rubber flooring option for home and professional flooring installations.
Rolls of rubber are available in thicknesses from 2 mm up to 1/2 inch thickness.
Avoid getting this rolled rubber product wet. Although very non-porous, this rubber material will absorb water over time when submerged repeatedly or power washed on a regular basis. To dry this rubber material, it is best to elevate the material off the ground or hand-dry.
Greatmats has professional and knowledgeable sales staff ready to assist with questions, volume discount quotes and samples.
Find rubber rolls in all thickness and color options available at the best prices anywhere. We offer great shipping rates on rubber flooring rolls, we ship rubber flooring rolls from locations nationwide.
1/2 inch material is recommended to be glued for installations over 500 SF.
Thickness size tolerance plus or minus .02 inches
4ft width size tolerance plus or minus 1/4 inch
Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In come cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified linear footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run.
For regular cleaning damp mop with hot water and a neutral pH cleaner.Shipping
Ships form Oregon. Contact customer service for shipping east of the Rocky Mountains.
This Product Ships Freight Only.
Please review our shipping disclaimer.
SPECIFICATIONS⌃ Back to top
|SF per Item||1.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||9|
|Interlock Loss||0.00 feet|
|Material Density||Shore A 60|
|Surface Finish||Smooth flat|
|Surface Design||Black with color flecks|
|Installation Method||Tape or glue down on hard flat surface|
|Border Strips Included||No|
|Manufacturer Warranty||5 year limited|
VIDEOS⌃ Back to top
Q & A⌃ Back to top