LonWood Madera with Top Seal Commercial Vinyl Rolls 6x60 Ft
LonWood Medera Vinyl Flooring, Commercial Sheet Vinyl
Top Features for LonWood Madera with Top Seal Commercial Vinyl Rolls 6x60 Ft
- Commercial grade vinyl flooring
- Wood grain surface
- Factory-applied urethane finish
- Recycled content
- Low VOC's
- MR & IEQ credits
Commercial Flooring, Museums Floors, Schools, Institutional, Retail, Commercial Office Flooring
NOTE: This item is a custom order and is not returnable.
LonWood Madera Vinyl Rolls with Topseal. LonWood Madera is a resilient sheet vinyl that features detailed graining that elegantly weaves around beautifully-rendered knotting. This extraordinarily realistic look is further enhanced by articulated plank lines resulting in a design that suggests the strength of old-world craftsmanship paired with the crisp, clean lines of contemporary living.
This floor requires glue down installation and seam sealing installation by a commercial flooring professional.
Heat Weld seams - Chemical Weld will not fuse to a urethane finish.
PLANK SCHEME MEASUREMENT: (nominal)
Plank Lengths: 32 inches (813 mm) and 16 inches (406 mm)
Plank Width: 4.75 inches (131 mm)
LonWood Sheet Vinyl Flooring Roll with Topseal is sold in rolls 6 ft wide x 60 ft long, and is available in a wide range of colors.
-Complete the seam using appropriate welding method.
-LonWood Madera Pattern: Approximately 4 inches (10.2 cm) per seam will be lost, with approximately 2 inches (5.1 cm) being taken from each sheet.
Additional length may be lost from each sheet when aligning the LonWood Madera Pattern (see wood grain pattern installation PDF)
Manufactures adhesives, sealers, and tape products are designed to be used specifically with LonWood Madera flooring. The use of adhesives and sundries not specifically recommended for LonWood Madera flooring may result in damage to the flooring jeopardizing appearance and/or performance.
JIS Q 9001:2004/JIS Q 9001:2000, the International Quality Assurance Standard
ISO 14001, Environmental Management Systems
Overall thickness: 0.08 inch (2.0 mm)
Wear layer thickness: 0.020inch (0.5 mm)
Roll Size: 6 ft (1.8 m) wide x 60 ft (18.3 m)
Weight: 0.6 lbs./sq. ft., 225 lbs./roll
GreenMedic: Formulated for microbial resistance
GreenAir: Formulated for low VOCs
20 - 40% post-industrial recycled content
-Contributes towards LEED MR 4.1 and MR 4.2
FloorScore Indoor Air Quality Certified
-Conforms to CA Specification 01350
LEED Low Emitting Materials
Adhesives and Sealants: LEED IEQ Credit 4.1
Flooring Systems: LEED IEQ Credit 4.3
Mop with a neutral pH cleaner.Shipping
Ships via freight delivery
This Product Ships Freight Only.
Please review our shipping disclaimer.
|SF per Item||360.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||9|
|Interlock Loss||0.00 feet|
|Material Hardness||Shore A 85|
|Surface Finish||Wood grain|
|Surface Design||Solid Color|
|Installation Method||Glue down, heat weld seams|
|Border Strips Included||No|
|Manufacturer Warranty||10 year limited|