LonRidge Vinyl Rolls 8 x 60 Ft

1. Cross-Hatch Pattern
2. Slip resistance
3. Speckled decoration
4. Interior or semi-exterior areas
5. Masks dirt
6. Easy to maintain
7. GreenAir®
8. Low VOC

The speckled decoration this floor features is what helps to mask dirt. It also features a cross-hatch pattern, which gives it an attractive, unique surface design. It has an embossed finish and grooved pattern for a high performing and aesthetically pleasing vinyl flooring option.

This product can be used in multiple settings. In addition to marine applications (certain docks, fish cleaning booth), it can also be used in exhibits (exhibition flooring), the entertainment industry, and specialty vehicles. The LonRidge sheet vinyl is available in Creme, Moccasin, Moondust, Russet, Smokey Black, and Yale Blue. These neutral colors combined with the floor’s speckled decoration and cross-hatch pattern make this a great choice for interior or semi-exterior areas, from the back or bed of a truck or specialty vehicle.

LonRidge® by Lonseal® Vinyl Flooring Specs

This LonSeal flooring solution features a distinctive design, slip resistant surface, attractive colors, and a variety of features. The rolls are 8 feet (2.44m) wide, 60 feet (18.3m) long, and 0.100 inches (2.5mm) thick. They also have a wear layer thickness of 0.032 inches (0.8mm). The rolls have a weight of 0.6 pounds per square foot (2.8kg/square meter), for a total weight of 290 pounds. Each full roll delivers 360 square feet of coverage.

This commercial grade vinyl flooring is Low VOC and GreenAir. It also meets standards for flammability of interior materials FMVSS 302: CFR 49 §571.302. This is one of the floor covering solutions for many settings that you can surely count on for safety and performance.

LonRidge® by Lonseal® Vinyl Flooring Installation

For current installation documents from Lonseal, please visit the Lonseal website, click here.

For General Lonseal Installation Information click here.

LonRidge® by Lonseal® Flooring Maintenance

Vessel Interior Installation Maintenance

1. Remove all gross soiling (food, gum, residues, etc.). Take care if using a scraper or putty knife to avoid permanently damaging the surface of the flooring.
   


2. Clean the surface with a microfiber dust mop pad.
   


3. Apply a properly diluted neutral cleaner to the surface using a microfiber wet mop pad. Only use neutral cleaners intended for sheet vinyl to clean the flooring. Use of other types of cleaners, even diluted bleach or ammonia, could cause permanent damage, like discoloration or staining.
   


4. A scrubbing pad may be used instead of a microfiber wet mop to clean the floor to address heavy soiling.
   


5. If necessary, use a clean microfiber mop pad and clean water to remove any remaining residue.
   


6. Allow the floor to fully dry.
   


7. Initial maintenance is the best time to apply a finish, if one is desired. Refer to the appropriate Maintenance Guide if intending to apply a finish.

Semi-Exterior Installation Maintenance

1. Remove all gross soiling (food, gum, residues, etc.). Take care if using a scraper or putty knife to avoid permanently damaging the surface of the flooring.
   


2. Clean the surface with a microfiber dust mop pad
   


3. Apply a properly diluted neutral cleaner to the surface using a microfiber wet mop pad. Only use neutral cleaners intended for sheet vinyl to clean the flooring.
   


4. A blue scrubbing pad may be used instead of a microfiber wet mop to clean the floor to address heavy soiling.
   


5. If necessary, use a clean microfiber mop pad and clean water to remove any remaining residue. A hose using clean, fresh water may be used to rinse off the flooring for areas that can drain directly off the vessel.
   


6. Allow the floor to fully dry.

FEATURES (data shown is nominal):
Roll Width: 8 ft. (2.44 m)
Roll Length: 60 ft. (18.3 m)
Overall Thickness: 0.100 in. (2.5 mm)
Wear Layer Thickness: 0.032 in. (0.8 mm)
Weight: 0.6 lbs./sq. ft. (2.8 kg/m²)

MEETS FMVSS 302: CFR 49 §571.302 Flammability of Interior Materials

EXCLUSIVE LONSEAL® FORMULATIONS: GreenAir®

WARNING: California Proposition 65

Pattern: Grooved, Flecks/Specks, Textured, Cross-Hatch
Finish: Embossed, Semi-Exterior
Width: 8 ft. (96 in.) (2.4 m)

Green Specs: LOW VOC, FMVSS

Due to its heavy embossing, proper heat welding of this product is not possible. Welding thread is not available for this product.

Shipping

Ships via freight delivery

This Product Ships Freight Only.
Please review our shipping disclaimer.

WARNING: This product can expose you to chemicals including Lead and/or Phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

PDF Documents:

• View Specifications Data Sheet