Safety Wall Pad 2x5 Ft x 2 inch WB Z-Clip ASTM

- Certified OSB
- Impact rated polyethylene foam
- Class A fired PVC Vinyl
- See More Details
Ships
Out: Estimate 2-4 Weeks on Average
-
Brown -
Royal Blue -
Navy Blue -
Pool Blue -
Black -
Purple -
Forest Green -
Pink -
Gray -
Yellow -
Orange -
Red -
Maroon -
Camel -
White -
Dark Gray -
Carolina Blue
Request Quote
Please Call for Sample Options
VIDEOS
TOP FEATURES
- Certified OSB
- Impact rated polyethylene foam
- Class A fired PVC Vinyl
- 2 inch thick foam
- 18 oz vinyl covering
- Leed certification
- Contains at least 60% recycled pre-consumer raw material
- Anti-Mildew, Anti-Fungus, Antimicrobial, Antibacterial treated
Use Types
Gym Wall Pads, Basketball Court Walls, School Wall Pads, Wrestling Rooms, Martial Arts, Combat Training, Safe Rooms
Safety Wall Pad 2x5 Ft WB Z-Clip ASTM, Class A PVC vinyl 18 oz
Impact wall pads is an indoor stationary Safety Wall Pad 2x5 Ft x 2 inch WB Z-Clip ASTM, intended for direct wall connection.
The right materials to make your project the very safest, it is certified OSB, Impact rated polyethylene foam, and Class “A” fire rated PVC vinyl. Pads are easy to install the 2 inch Thick Impact rated polyethylene foam laminated to 7/16 inch oriented strand board covered in Red Class A fire rated 18-ounce vinyl. 1inch nailing margin top and bottom.
Indoor stationary wall padding panel, intended for direct wall connection. The panel is a wood backed pad of inch Impact rated polyethylene foam bonded to the face using a two-part adhesion process. The foam and wood are covered front and sides then firmly stapled onto the back using Class A PVC Vinyl.
Components
1. Backer Board: Not less than 7/16-inch- (11-mm-) SFI® Certified Responsible Urea Formaldehyde Free recycled composite wood backer board. This portion of the product contributes toward satisfying Credit IEQ 4.4 under LEED.
2. Foam Layer - 2 inch polyethylene foam meets standards for ASTM 2440. The test method quantifies impact in terms of g-max and Head Injury Criterion (HIC) scores. Promotes
closed-loop recycling of post-industrial scrap. Contains at least 60% and up to 100% recycled pre-consumer raw material. The use of pre-consumer recycled material can contribute to LEED® certification points.
3. Covering - 18 oz. laminated leather grain embossed vinyl BACshield: Anti-Mildew, Anti-Fungus, Antimicrobial, Antibacterial treated, UV treated. Passes ASTM E84 (Class A), NFPA-701 & Cal 117 FR tests C.P.S.I.A. Certified.
Indoor stationary wall padding panel, intended for direct wall connection. The panel is a wood backed pad of inch Impact rated polyethylene foam bonded to the face using a two-part adhesion process. The foam and wood are covered front and sides then firmly stapled onto the back using Class A PVC Vinyl.
Components
1. Backer Board: Not less than 7/16-inch- (11-mm-) SFI® Certified Responsible Urea Formaldehyde Free recycled composite wood backer board. This portion of the product contributes toward satisfying Credit IEQ 4.4 under LEED.
2. Foam Layer - 2 inch polyethylene foam meets standards for ASTM 2440. The test method quantifies impact in terms of g-max and Head Injury Criterion (HIC) scores. Promotes
closed-loop recycling of post-industrial scrap. Contains at least 60% and up to 100% recycled pre-consumer raw material. The use of pre-consumer recycled material can contribute to LEED® certification points.
3. Covering - 18 oz. laminated leather grain embossed vinyl BACshield: Anti-Mildew, Anti-Fungus, Antimicrobial, Antibacterial treated, UV treated. Passes ASTM E84 (Class A), NFPA-701 & Cal 117 FR tests C.P.S.I.A. Certified.
Certified Clean Air GOLD
• USGBC LEED credits
• California 01350 Special Environmenta lRequirements (CDPH)
• California Department of General Service (DGS) Indoor Air Quality Specifications for Open Panel Office Furniture
• Compliant to BIFMA e3 standard credit 7.6.2 and 7.6.3
STANDARD MANUFACTURING
Typical panel to be manufactured at 24 inch width by specified height.
All columns and corners to be pre-fabricated to fit field condition
INSTALLATION
1. 1 inch Nail Margin top and bottom along width edge attached directly to wall using
appropriate hardware for wall type. Refer to ASTM standards for height above finished
floor. 4 inch AFF to bottom of foam current.
• USGBC LEED credits
• California 01350 Special Environmenta lRequirements (CDPH)
• California Department of General Service (DGS) Indoor Air Quality Specifications for Open Panel Office Furniture
• Compliant to BIFMA e3 standard credit 7.6.2 and 7.6.3
STANDARD MANUFACTURING
Typical panel to be manufactured at 24 inch width by specified height.
All columns and corners to be pre-fabricated to fit field condition
INSTALLATION
1. 1 inch Nail Margin top and bottom along width edge attached directly to wall using
appropriate hardware for wall type. Refer to ASTM standards for height above finished
floor. 4 inch AFF to bottom of foam current.
Shipping
Ships via freight delivery shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
WARNING: This product can expose you to chemicals including Lead and/or Phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
ANSWERS
SPECIFICATIONS
SKU# | SPad-2x5WBZ-Clip |
In Stock | Yes |
Product Type | Mat |
Product Edging | Straight |
Thickness | 2 inch |
Width | 2.00 feet |
Length | 5.00 feet |
SF per Item | 12.00 |
Weight | 26.00 lbs |
Packaging | Shrink Wrapped on Pallets |
Non Absorbent | No |
Special Adhesives | No |
Interlock Loss | 0.00 feet |
Interlocking Connections | No |
Made In | USA |
Surface Finish | Smooth, Flat |
Surface Design | Solid color |
Installation Method | Direct screw on or Z-Clip |
UV Treated | Yes |
Reversible | No |
Border Strips Included | No |
HOW TO'S
PDF Documents: