Safety Wall Pad 2x4 Ft x 2 inch WB Z-Clip ASTM
Safety Wall Pad 2x4 ft x 2 inch, Indoor Wall Padding
Top Features for Safety Wall Pad 2x4 Ft x 2 inch WB Z-Clip ASTM
- Certified OSB
- Impact rated polyethylene foam
- Class A fired PVC Vinyl
- 2 inch thick foam
- 18 oz vinyl covering
- Meets ASTM2440 Standards
- LEED certification
- Contains at least 60% recycled pre-consumer raw material
Gym Wall Pads, Basketball Court Walls, School Wall Pads, Wrestling Rooms, Martial Arts, Combat Training, Safe Rooms
Ships via freight delivery shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
Safety Wall Pad 2x4 Ft x 2 inch WB Z-Clip ASTM - Class A PVC vinyl 18 oz
Impact wall pads is an indoor stationary Safety Wall Pad 2x4 Ft x 2 inch WB Z-Clip ASTM, intended for direct wall connection.
Indoor stationary wall padding panel, intended for direct wall connection. The panel is a wood backed pad of inch Impact rated polyethylene foam bonded to the face using a two-part adhesion process. The foam and wood are covered front and sides then firmly stapled onto the back using Class A PVC Vinyl.
1. Backing - 7/16 inch Georgia Pacific Blue Ribbon® oriented strand board (OSB); Third-party
certified to the Sustainable Forestry Initiative® procurement standard, Exposure 1 bond
durability. Contains no added urea formaldehyde resins. Georgia-Pacific building
products can contribute to LEED® certification points.
2. Foam Layer - 2 inch polyethylene foam meets standards for ASTM 2440. The test method
quantifies impact in terms of g-max and Head Injury Criterion (HIC) scores. Promotes
closed-loop recycling of post-industrial scrap. Contains at least 60% and up to 100%
recycled pre-consumer raw material. The use of pre-consumer recycled material can
contribute to LEED® certification points.
3. Covering - 18 oz. laminated leather grain embossed vinyl BACshield: Anti-Mildew,
Anti-Fungus, Antimicrobial, Antibacterial treated, UV treated. Passes ASTM E84 (Class A),
NFPA-701 & Cal 117 FR tests C.P.S.I.A. Certified.
Typical panel to be manufactured at 24 inch width by specified height.
All columns and corners to be pre-fabricated to fit field condition
1. 1 inch Nail Margin top and bottom along width edge attached directly to wall using
appropriate hardware for wall type. Refer to ASTM standards for height above finished
floor. 4 inch AFF to bottom of foam current.
|Material Type||Vinyl covered Foam|
|SF per Item||8.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||1|
|Interlock Loss||0.00 feet|
|Surface Finish||Smooth, Flat|
|Surface Design||Solid color|
|Installation Method||Direct screw on or Z-Clip|
|Border Strips Included||No|