Outdoor Field Wall Padding with Z Clip 2 ft x 4 ft
(1 Answered Questions)
Be the first to review this product
$288.80/each
Save 4%
$36.10/sqft
Reg: $304.00/each
Handling Time Estimate: 4-6 Weeks
- 19 oz. outdoor premium vinyl covering
- 3-inch polyurethane foam interior
- 3/4 inch moisture resistant composite backing board
- See More Details
- 19 oz. outdoor premium vinyl covering
- 3-inch polyurethane foam interior
- 3/4 inch moisture resistant composite backing board
- Large selection of color choices
- Z Clip attachment method for concrete and wood walls
- High UV resistant vinyl cover
- Made in the USA
- Graphics available for additional cost
Sports Field Padding, Baseball and Softball Fields, Football Fields, Outdoor Playground Walls
NOTE: This item is a custom order and is not returnable.
Featuring a tear and abrasion resistant 19 oz vinyl, our Outdoor Field Wall Padding with Z Clip 2 ft high x 4 ft wide for masonry and wood walls will provide safety for athletes.
Our 2x4 foot chain link fence padding is made with a 19 oz. UV-resistant extruded vinyl covering. This fence padding features 3-inch-thick high-impact polyurethane foam padding and a 3/4-inch-thick moisture-resistant composite board for internal structural support. It is a time-tested, proven product that provides facilities with an affordable safety solution.
Each pad has 3 weep holes to evacuate moisture, making this an ideal choice for long-lasting outdoor wall pads. The vinyl cover is folded around the backside of the plywood backing and stapled every 3 inches. The staples are made of stainless steel to help prevent corrosion.
The filler foam is glued to the plywood backing to ensure the foam stays in place. The adhesive used in this padding is a resin rubber base adhesive with a high flexibility factor. The glue is water resistant as well as heat and cold resistant and also has a high bonding factor.Our 2x4 foot chain link fence padding is made with a 19 oz. UV-resistant extruded vinyl covering. This fence padding features 3-inch-thick high-impact polyurethane foam padding and a 3/4-inch-thick moisture-resistant composite board for internal structural support. It is a time-tested, proven product that provides facilities with an affordable safety solution.
Each pad has 3 weep holes to evacuate moisture, making this an ideal choice for long-lasting outdoor wall pads. The vinyl cover is folded around the backside of the plywood backing and stapled every 3 inches. The staples are made of stainless steel to help prevent corrosion.
Outdoor Field Wall Padding with Z Clip is available in a variety of sizes and colors, for a custom design. In addition, optional custom digital graphics and/or lettering is available with our Outdoor Field Wall Padding with Z Clip with Graphics products. Please call for a custom quote.
Product Components
Backing:
- Material: 3/4 inch Square Edge AdvanTech Water Resistant Sheathing Panel
- All sides stained and sealed with exterior grade finish
- Exposed plywood surface is painted to match the vinyl color
Vinyl covering:
- Total Weight: 19 oz/sq yd (ASTM D3776)
- Construction: 18x18, 1300 x 1300 Denier
- Grab Tensile: Warp 750 lb/2'', Fill 655 lb/'' (ASTM D5034)
- Tongue Tear: Warp 154 lb/in, Fill 135 lb/in (ASTM D2261)
- Adhesion: 38 lb/2'' (ASTM D571)
- High UV resistance
- Cold crack: -30 degrees Fahrenheit (ASTM D2136)
- Rot, mildew, and fungus resistant
Foam interior:
- 3-inch high impact 1580 polyurethane foam
- Density: 1.45 - 1.55 pct (ASTM D3574)
- Resilience (% Rebound): 40 - 48 (ASTM D3574)
- Tear Resistance: 1.5 - 2.5 lbs/in (ASTM D3574)
- Flammability: Passes with Class 1 Fabric
Z-Clip Installation Method
Attachment: Aluminum Z-Clips, 2.5 inches wide x .125 inch thick, mounted to the backer panel using 1/4 x 3/4 inch stainless screws screwed.
Because mounting hardware requirements vary by application, wall fasteners are not included. Furring the middle of the wall pad may be required if the wall is not flat/flush.
Suggested Fastening Hardware for Concrete, Block, or Brick: Tapcon Hex Head: 1/4'' x 1-3/4'' or Drive Pins/Mushroom Anchors: 1/4'' x 1'' long
Wall pads are available in custom sizes. Please call to order.
Maintenance
Wipe down as needed.
Shipping
Ships via freight delivery shrink wrapped on pallets.
Please review our shipping disclaimer.
SKU# | BFWPZ42 |
In Stock | Yes |
Product Type | Mat |
Material Type | Vinyl covered Foam |
Product Edging | Straight |
Thickness | 3-3/4 inch |
Width | 4.00 feet |
Length | 2.00 feet |
SF per Item | 8.00 |
Weight | 21.00 lbs |
Packaging | Shrink Wrapped on Pallets |
Non Absorbent | Yes |
Interlock Loss | 0.00 feet |
Interlocking Connections | No |
Made In | USA |
Surface Finish | Smooth flat |
Surface Design | Solid color |
Installation Method | Z Clip |
UV Treated | Yes |
Reversible | No |
Border Strips Included | No |
Manufacturer Warranty | 1 year limited |
Product Questions:
Q: I am looking for outdoor pads for a concrete wall that will help eliminate the noises and bouncing of the balls when kicking against the wall. Will these pads do it?
A: We don't have any testing data for noise reduction with wall pads. From our experience, it will reduce noise somewhat but not as much as acoustic sound panels. If you would like to reach out to our wall pad specialist, you can call 877-822-6622 or fill out an information request.