Home / Garage Flooring & Tiles / SupraTile Dovetail Textured Colors 7mm x 20x20 Inches Case of 10

SupraTile Dovetail Textured Colors 7mm x 20x20 Inches Case of 10

alt=
/images/floor-tiles-ap/dove-tex-ls.jpg
alt=
/images/floor-tiles-ap/dove-tex.jpg
  • Quick and easy installation and highly water resistant
  • Resistant to oils, chemicals, mold and mildew
  • Excellent resistance to impact, moisture and abrasion
  • See More Details
$203.33/carton
Save 19%
$7.53/sqft
Reg: $254.16/carton
Be the First to Write a Review
Handling Time Estimate: 1-3 Working Days
  • SupraTile 7MM DOVETAIL 20.5x20.5 in Textured terracota swatch. SupraTile 7MM DOVETAIL 20.5x20.5 in Textured terracota swatch.
    Terracotta
  • SupraTile 7MM DOVETAIL 20.5x20.5 in Textured royal blue swatch. SupraTile 7MM DOVETAIL 20.5x20.5 in Textured royal blue swatch.
    Royal Blue
  • SupraTile 7MM DOVETAIL 20.5x20.5 in Textured white swatch. SupraTile 7MM DOVETAIL 20.5x20.5 in Textured white swatch.
    White
  • SupraTile 7MM DOVETAIL 20.5x20.5 in Textured forest green swatch. SupraTile 7MM DOVETAIL 20.5x20.5 in Textured forest green swatch.
    Forest Green
  • SupraTile 7MM DOVETAIL 20.5x20.5 in Textured red swatch. SupraTile 7MM DOVETAIL 20.5x20.5 in Textured red swatch.
    Red
  • SupraTile 7MM DOVETAIL 20.5x20.5 in Textured yellow swatch. SupraTile 7MM DOVETAIL 20.5x20.5 in Textured yellow swatch.
    Yellow
  • SupraTile 7MM DOVETAIL 20.5x20.5 in Textured navy blue swatch. SupraTile 7MM DOVETAIL 20.5x20.5 in Textured navy blue swatch.
    Navy Blue

Request Sales Quote
Please Call for Sample Options

VIDEOS

How To Cut PVC Floor Tiles - Let’s go over how to cut PVC flooring tiles. Shop PVC Flooring Now: https://www.greatmats.com/pvc-flooring.php SAFETY When cutting any kind of flooring, it’s important to use the proper safety equipment. This includes hearing protection (if you’re going to use power tools), eye protection and sometimes a mask. And it’s always a great idea to consider using quality anti fatigue mats from Greatmats! CONCERNS In this video we’re going to demonstrate how to cut PVC Floor Tiles. The flexible nature of this type of product is the determining factor in the type of cutting devices that work best. PVC floor tiles are available with both a raised base and a low profile form. TOOLS If you’re hoping to cut these tiles using a power saw, it’s best to use a saw that travels in one direction. Those that use a reciprocating motion will cause the tile to flex and move during cutting. The same applies to non-powered saws or knives. Aside from cutting devices, you’ll also want the following tools: A measuring device A marking tool (Chalk Marker, Pen, Permanent Marker) A square A metal straight edge And maybe a wooden 2x4 PROCESS The motion of the cutting device is important when using both power tools and hand tools including: Circular Saw/Table Saw/Compound Miter Saw A Jig Saw A Utility Knife A Hacksaw and Crosscut Saw Heavy Duty Scissors Hole Saw For all cut you want to start by measuring and marking where you’d like to cut your PVC Floor Tile. If you’re simply looking to cut off an end of a tile, a t-square or framing square will help you keep that nice 90 degree angle. Circular Saw Blades (Circular saw blades are designed for straight line cuts.) Simply follow your marked line with the blade. For a circular saw, push the saw along the line until you completed the cut. For a table saw, push the tile pass the saw blade until you’ve completed the cut. For a compound miter saw, pull the blade down through the tile. The size of your saw and/or tile may limit your capabilities with this type of cut as you may not have enough coverage of the saw blade to cut a full tile. In some cases you can flip the tile and cut again from the other side to complete the cut. We don’t recommend any of these saws for corner cuts. Utility Knife (Utility Knives can be used to cut in straight lines or curves.) Once you’ve marked the tile, align a metal straight edge with your mark. Make sure your straight edge is longer than the cut you’ll be making so you can make continuous cuts. Then, following the straight edge guide, make a series of several scores until you’ve developed a nice groove. Then, let the tile either hang off the edge of your workbench at the cut - or place a 2x4 board under the cut to allow that cut to open. Then continue to score the rubber until you’ve made it all of the way through. The cut will continue to open with each score, allowing you to continue cutting with limited friction on the blade. If you need to notch out a section the roll to go around something like a door frame. The same procedure applies. Just make sure to start cutting from an interior corner and pull the blade toward the outer edge. This will help prevent over-cutting. Heavy Duty Scissors (For straight lines or curves) Depending on the thickness of your tile and the sturdiness of your scissors, cutting pvc floor tiles with a scissors may be a possibility. This will require quite a bit of hand strength, however. Reciprocating Blades (Let’s see why reciprocating bladed saws can cause difficulty in the cutting process by using this jigsaw.) Hand Saws (Hack Saw and Cross Cut Saw) If using a hand saw, its best to place your tile off the edge of a work bench and perform all cutting motions pushing down, to avoid lifting the tile off of your work surface. #HowToCutPVCFloorTiles

How to Cut PVC Floor Tiles

  1. Quick and easy installation and highly water resistant
  2. Resistant to oils, chemicals, mold and mildew
  3. Excellent resistance to impact, moisture and abrasion
  4. Warm and comfortable underfoot
  5. Can be installed over old uneven, or contaminated sub-floors
  6. Superior sound absorption, integrated ramp edging for most styles
  7. Easy to remove and relay, protective topcoats available
  8. Made from 80% recycled content

Military Installations, Manufacturing Facilities, Loading Docks

SupraTile Dovetail Textured Colors 7mm x 20x20 Inches - Case of 10

Heavy duty SupraTile Dovetail Textured Colors 7mm x 20x20 Inches, textured surface floor tile features the superior Dovetail Joint, and is our thickest and strongest interlocking SupraTile Dovetail Textured Colors 7mm x 20x20 Inches Case of 10.

Heavy duty SupraTile Dovetail Textured Colors 7mm x 20x20 Inches, textured surface floor tile features the superior Dovetail Joint, and is our thickest and strongest interlocking SupraTile Dovetail Textured Colors 7mm x 20x20 Inches Case of 10.

The SupraTile 7mm tile with dovetail joint interlocks is ideal for harsh, demanding environments such as loading docks, heavy manufacturing areas, airports, truck repair facilities, mining operations, museums, and similar facilities. Each tile can hold up to 20,000 lbs with no indentation.

We recommend the full dovetail joint for heavy-duty applications such as car or truck repair facilities, commercial hangars, military installations, manufacturing facilities, and other similar uses.
The SupraTile 7mm industrial floor tile with textured surface is available in a large selection of color options. Interlocking color-matched edging is also available for the Dovetail Joint tiles. Each tile measures 19.75 inches square (2.7 sq ft/tile).

This product is made from 80% recycled content.

Shipping

Ships in cartons via ground service to your door, for larger orders product may ship freight delivery.

Please review our shipping disclaimer.

WARNING: This product can expose you to chemicals including Lead and/or Phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

SKU# SUPRA7-DT-20.5x20.5-TX-C
In Stock Yes
Product Type Tile
Material Type PVC Plastic
Product Edging Interlocking
Thickness 7 mm
Width 1.67 feet
Length 1.67 feet
SF per Item 27.00
Weight 38.50 lbs
Packaging Cartons
Number of Pieces per Package Type 10
Non Absorbent Yes
Special Adhesives No
Universal Interlock Yes
Interlock Loss 0.02 feet
Material Hardness Shore A 92
Interlocking Connections Yes
Made In Ireland
Surface Finish Textured
Surface Design Solid color
Installation Method Interlocking, dry lay
UV Treated No
Reversible No
Border Strips Included No
Manufacturer Warranty 20 year

RELATED PRODUCTS