Performance Motivate 7.5 mm Rolls per SF
Performance Motivate 7.5 mm Robber Rolls, High Color Rubber Rolls
Top Features for Performance Motivate 7.5 mm Rolls per SF
- Shock and sound absorbent
- Fade resistant
- Wears well
- Slip resistant wet or dry
- Indoor only
- Cardio, light weights and selectorized equipment
Fitness centers, health clubs, and more.
Performance Motivate 7.5 mm Rolls are tailored for light strength and conditioning. It combines a 2.5 mm wear layer that resists scuffing and marking with a tailored 5 mm base layer to create a unique product.
7.5mm (2.5mm+5mm) x 48 inch Rolls. Priced by the square foot in 4 foot widths.
Stacked Performance Motivate Rolls with itstru-5 Technology. Consisting of 5mm -6015H Underlayment with a 2.5 mm Surface Wear Layer for a combined product height of 7.5 mm.
With a durable wear layer made from vulcanized EPDM rubber, this product resists the scuffing and marking that is common in strength and conditioning applications. This dual durometer flooring system features a premium 2.5mm rubber planting surface that is fusion bonded to a 5mm performance base layer. The result: a balanced distribution of force reduction and energy restitution, designed for the shift in fitness from equipment to more functional training.
Recycled rubber is a growing category for fitness flooring within the flooring industry and continues to increase in popularity as a practical solution for fitness applications. Performance Motivate combines recycled rubber backing with colorful rubber wear layers. The result is a multi-functional high performance floor that is durable and easy to clean. In addition, the overall comfort of recycled rubber flooring provides improved ergonomics, acoustical benefits, and shock absorption, making it ideal for fitness centers, health clubs, and more.
Recycled rubber flooring is on the rise because of its positive environmental attributes. Benefits, such as high-recycled content, low-VOC emissions, and low life-cycle costs, make it an environmentally preferable flooring solution for a number of applications.
Performance Motivate Rolls are manufactured from recycled materials and slight variance in shade and color chip dispersion is normal. It is the installer's responsibility to inspect all products to insure the correct style, thickness, and color. Any moderate to severe discrepancies should be reported immediately before beginning the installation.
This product features two layers of material and required two layers of glue down installation.
Tensile Strength - ASTM D 412 >200 PSI
Flexibility 1/4 inch mandrel - ASTM F 137 Pass
Thermal Conductivity - ASTM C 518 >0.4
Static Load Limit - ASTM F 970 @ 250PSI 0.004 inch Typical
Coefficient of Friction - ASTM D 2047 > 0.9
V.O.C. Compliant - ASTM D 5116 Yes
Color Stability - ASTM F-1515 Good
Chemical Resistance - ASTM F-925 Good
Abrasion Resistance - ASTM D 3389/EN 649 <1g, 100 cycles
Resistance to Heat - ASTM F 1514 Δ E, <8.0
Pill Test - ASTM D 2859 Pass
Vertical Deflection/Deformation - ASTM F 2772 0.73 mm
Surface Effect Slip Resistance - ASTM F 2772 Pass
Ball Rebound - ASTM F 2772 99.7%
Force Reduction - ASTM F 2772 12.6%
Thickness size tolerance plus or minus .02 inches
4 ft width size tolerance plus or minus 3/4 inch
Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In come cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified linear footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run.
Damp mop with a microfiber mop or auto-scrub using an approved pad or nylon brush with E-Cleaner or neutral PH cleaner.Shipping
Ships via freight delivery, shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
⌃ Back to top ACCESSORIES FOR PERFORMANCE MOTIVATE 7.5 MM ROLLS PER SF
|SF per Item||1.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||9|
|Interlock Loss||0.00 feet|
|Surface Design||Colored fleck|
|Installation Method||Glue down|
|Border Strips Included||No|
|Manufacturer Warranty||3 year limited|
Q & A⌃ Back to top