Fitness Flooring, Health Clubs, Indoor Recreation, Locker Rooms, Functional Training, Weight Rooms, Spinning Rooms, Entryways, Corridors, Warm up Areas, Ice Arenas, Ski Resorts, Bowling Centers, Golf Facilities

NOTE: This item is a custom order and is not returnable.

Easy-to-Install Rubber Sports Flooring

Our roll of rubber is easy to install, as it will go over the top of almost any firm surface. Concrete and plywood are the most common types of subfloors to use with our rubber sports flooring rolls, as long as the subfloor is clean and dry.

Should the subfloor area have any cracks or indentations of more than 3/16 inches, installers should repair these areas before laying out the roll.

Customers can order the precise length of rubber sports flooring they want to use. Each roll is 4 feet wide, so it’s easy to roll out over a large space in very little time.

Installers will need to use glue or tape to secure the roll of rubber to the subfloor. Apply a thin layer of adhesive to the subfloor before attaching the roll. Always lay the rubber on the subfloor within 30 minutes of applying the adhesive, or the permanency of the installation may suffer.

Durable Athletic Rubber Flooring Roll

Even though this roll measures only 1/4 inch in thickness, customers can rest assured that they will receive a long-lasting level of performance. Each roll carries a 5-year limited manufacturer’s warranty, but most customers receive a far greater lifespan from these floors. That ¼ inch thickness also makes the roll lighter than ½ inch gym flooring rolls, so it’s easier to move.

These rolls provide an eco-friendly material, as they consist of 82% post-consumer recycled materials. The roll may contribute to LEED points for a building, and it is Recycled Content -3rd Party Verified.

These are Made in USA flooring rolls, so customers can trust the quality of the materials and the precise manufacturing tolerances in use. Should the customer need a thicker roll, both 8mm and 3/8-inch rolls are available.

It will provide slip resistance, ensuring that athletes have the grip they need to make quick moves during workouts. Weightlifters can trust that they will receive a high level of resistance from this rolled mat, giving them the leverage they need to excuse proper form on lifts.

In a busy athletic facility, noise can be a problem. Rubber flooring naturally absorbs noise, creating a more pleasant area for working out than those facilities that use hard floors where the sound may echo.

Fitness Gym Flooring Roll Specifications

• Width: 4 feet
  
• Length: Custom cut by the foot
  
• Thickness: 1/4 inches
  
• Weight per linear foot: 1.3 pounds
  
• Color: 10% Blue
  
• Texture: Smooth

Maintenance and Care

Avoid leaving loose debris on the surface of the rubber sports flooring for long periods of time, as people walking across the flooring could grind the dust and dry debris into the rubber, creating stubborn soils that could affect the grip of the material.

To remove dry dirt and debris, customers can sweep the surface with a broom, or they can use a dust mop or vacuum cleaner. High-traffic areas may need sweeping a couple of times a day, while low-traffic areas could use sweeping a couple of times a week.

To clean the surface more thoroughly, a wet mop with a neutral pH floor cleaner should do the job adequately. Some people prefer to use an auto scrubber with a nylon brush head. The manufacturer recommends Diversey Profi Floor Cleaner and Grease Remover as the cleaning solution.

After rinsing the floor mat, pick up the excess water with a wet/dry vacuum. Do not leave puddles of water on the top of the surface. Give the area time to air dry before allowing people to walk on it again.

Maintenance

Sweep, dust mop or vacuum. Scrub with neutral pH cleaner.

Shipping

Ships via freight delivery only, shrink wrapped on pallets.

Please review our shipping disclaimer.

SKU#	RR.83.10102.48.0600
In Stock	Yes
Product Type	Roll
Material Type	Rubber
Product Edging	Straight
Thickness	1/4 inch
Width	4.00 feet
Length	1.00 feet
SF per Item	1.00
Weight	1.30 lbs
Packaging	Shrink Wrapped on Pallets
Non Absorbent	Partial
Special Adhesives	Yes
Interlock Loss	0.00 feet
Material Hardness	Shore A 60
Interlocking Connections	No
Made In	USA
Surface Finish	Smooth flat
Surface Design	10% Color fleck
Installation Method	Tape or glue down on hard, flat surface
UV Treated	No
Reversible	Yes
Border Strips Included	No
LEED Points	Yes
Manufacturer Warranty	5 year limited manufacturer