EGrip III Adhesive 4 Gal Pail

EGrip III Adhesive 4 Gal Pail
/images/adhesive-for-rubber/egripiii.jpg
(4 Answered Questions) Be the first to review this product
$281.65/each
Save 19%
Reg: $352.06/each
Handling Time Estimate: 11-14 Working Days
Request Sales Quote
Please Call for Sample Options
  1. Easy to trowel and apply
  2. Solvent Free
  3. No mixing required
  4. Excellent curing cycle
  5. Very low odor
  6. Non-flammable

Max Playground Rubber Tile, Rolled Rubber Eureka, UltraTile, Performance Rolls and MX Outdoor Rubber Tile products.

is a one-component, solvent-free, urethane adhesive is a revolutionary zero VOC-calculated product featuring low odor and improved tack properties for easy application and flat, concealed seams. Egrip III adhesive coverage using 1/8 inch square notched trowel: 60SF per gallon over concrete 50SF per gallon over asphalt

E-Grip III is a revolutionary zero-VOC adhesive. The low odor, one-component urethane adhesive is formulated specifically for use with Max Playground Rubber Tile, Rolled Rubber Eureka, UltraTile and MX Outdoor Rubber Tile products. It features excellent trowability and improved tack properties, making it easy to apply and create flat, concealed seams. E-Grip III has been specifically engineered to be solvent-free. With a moisture-cured, no-mix, non-sag and permanently elastic formula, it provides excellent adhesion to elastomers, concrete, and wood in both indoor and outdoor applications.

Coverage Rates:

120-square-feet/gallon - 1/16-inch by 1/32-inch by 5/64-inch U notch trowel
95-square-feet/gallon - 1/16-inch by 1/16-inch by 1/16-inch square notch trowel
60-square-feet/gallon - 1/8-inch by 1/8-inch by 1/8-inch square notch trowel

Note: This item is not returnable.

Shipping

Ships via ground or freight delivery on pallets.

This Product Ships UPS Ground, FedEx Ground and/or Freight.
Please review our shipping disclaimer.

SKU# AC1008
In Stock Yes
Width 0.00 feet
Length 0.00 feet
SF per Item 0.00
Weight 58.00 lbs
Packaging Shrink Wrapped on Pallets
Non Absorbent Yes
Special Adhesives Yes
Interlock Loss 0.00 feet
Interlocking Connections No
Installation Method Glue down
UV Treated No
Reversible No
Border Strips Included No
Floor Score No
Green Label No
ADD TO CART

Product Questions:

Q: How can we clean access glue of from rubber flooring ? What can we use ?
A: Once the adhesive has cured, it is extremely difficult to remove. You will want to take extra precautions not to damage the surface area. There are urethane adhesive removers on the market. Before removing the adhesive, cover the surrounding surface from splashes or spills of the remover. If you have an order from us, please call your sales representative to discuss.
Q: What trowel would I use to install Centaur CS97A, 50 foot rolls?
A: 1/16 ̋ square- notched trowel
Q: What trowel would I use to install Centaur CS97A, 50 foot rolls?
A: 1/16 ̋ square- notched trowel
Q: Do you have to wait for it to dry before rolling the flooring over it? Or is it a wet application?
A: The rolled rubber should be installed over wet adhesive. Spread the adhesive using the proper size square-notched trowel. Take care not to spread more E-Grip III than can be covered with flooring within 30 minutes. The open time of the adhesive is 30–40 minutes at 70°F and 50% relative humidity.

RELATED PRODUCTS

alt=
/images/adhesive-for-rubber/egripiii.jpg