Action Sport Rubber Gym Tile 10% Color 1 Inch x 2x2 Ft.
Be the first to review this product
$32.64/tile
Save 19%
$8.16/sqft
Reg: $40.80/tile
Handling Time Estimate: 3-4 Weeks on Average
- Shock and impact absorption
- High Impact activities
- Slip resistant wet or dry
- See More Details
- Shock and impact absorption
- High Impact activities
- Slip resistant wet or dry
- Gouge, dent, and scratch resistant
- Comfort underfoot
- Easy to clean and maintain
- 88% recycled rubber material
- Made in the USA
Olympic-Style Lifting, Free Weights, Cardio and Functional Training Areas, Selectorized Strength Weight Rooms, High School, Collegiate, and Professional Gyms, XFit
NOTE: This item is a custom order and is not returnable.
Action Sport Rubber Gym Tile 10% Color
High-performance 10% color rubber sports flooring tiles are not affected by gym equipment and will withstand daily use from moderate to extreme weight drops. Each 2x2 Ft. is a one-inch thick shock-absorbing tile with a molded pedestal bottom base and a surface wear layer that adds to your design and matches your color scheme. The pedestal style bottom allows for drainage and cable routing.
The proprietary inner layer is for durability and longevity. These rubber workout floor tiles are designed for exceptional noise and shock absorption reduction. They are also gouge, dent, scratch, wear, and scuff resistant. Made from 88% recycled content.
These can be installed in weight rooms or commercial gyms using adhesive or dowel pins, which do not require adhesive.
Test Data:
Density: ASTM D3676 Top Layer - 65 - 80 pcf (depends on surface color)
Hardness: ASTM D2240 (Shore A) - 65 +/-5
Tear Strength: ASTM D624 - pli min
Elongation (Wear Layer only): ASTM D412 - >75%
Tensile Strength (Wear Layer only): ASTM D412 - >200 psi
Resistance to Chemicals: ASTM F925 - No change
Coefficient of Friction: ASTM D2047 - >.95
Critical Radiant Flux: ASTM E648 - Class II
Force Reduction: ASTM F2772 - < 50%
Resistance to Heat: ASTM F1514 - E = 2.56
Resistance to Light: ASTM F1515
100 hours - E = 6.4
200 hours - E = 5.98
300 hours - E = 6.72
400 hours - E = 6.12
Acoustical Data (tested on 6 inch concrete slab):
ASTM E90 - STC 54
ASTM E492 - IIC 53
ASTM E2179 - IIC 24
Also available are standard and ADA border reducers with these thick rubber athletic flooring reducers connected directly to the main tiles. These edge ramp pieces reduce tripping hazards and allow easy on and off of the fitness rubber floor area.
LEED Qualification Qualifies for Material and Resources Credit, and Indoor Environmental Quality (EQ) Credit.
Installation Subfloor Options
When installing tiles wall to wall you can use dowel pins. Tiles can be installed over concrete, wood, tiles and carpeted floors, using this method.
For a glue down installation, acceptable subsurface types are concrete, wood subfloors.
Not considered to be suitable underlayments, particleboard, chipboard, Masonite, and Lauan.
Disclaimer:
Rubber tiles will expand and contract slightly, depending on whether the tiles receive exposure to varying temperatures, sunlight or humidity. Because of the changes in size of the tiles when exposed to sunlight, it's not recommended to install these tiles outdoors.
Maintenance
Sweep, dust mop or vacuum. Damp mop with microfiber mop or an auto scrubber with a soft nylon brush. Use Diversey Profi Floor Cleaner and Grease Remover detergent and dilute with water. Vacuum up rinse water. Allow to dry before foot traffic.
Shipping
Ships via freight delivery shrink wrapped on pallets.
Please review our shipping disclaimer.
| SKU# | AP.25.1010 |
| In Stock | Yes |
| Product Type | Tile |
| Material Type | Rubber |
| Product Edging | Straight |
| Thickness | 1 inch |
| Width | 2.00 feet |
| Length | 2.00 feet |
| SF per Item | 4.00 |
| Weight | 18.00 lbs |
| Packaging | Shrink Wrapped on Pallets |
| Non Absorbent | Partial |
| Interlock Loss | 0.00 feet |
| Material Hardness | Shore A 65 |
| Interlocking Connections | No |
| Made In | USA |
| Surface Finish | Smooth |
| Surface Design | 10% Color fleck |
| Installation Method | Glue down and or dowel pins |
| UV Treated | No |
| Reversible | No |
| Border Strips Included | No |
| Flammability | ASTM E648 - Class II |
| Static Test | ASTM D2047 - >.95 |
| LEED Points | Yes |
| Manufacturer Warranty | 5 year limited manufacturer |
View Installation InstructionsRELATED PRODUCTS
(1)
