NOTE: This item is a custom order and is not returnable.

The reducer measures 1 inch in thickness at the end that connects to the tile flooring. The other end measures a 1/4 inch in thickness, resulting in a gradual ramp angle.

Material Options

The reducer consists of a safe rubber material that will be easy to match to an existing rubber flooring layout. This is a Made in the USA product, so customers can trust that the manufacturer is only using the highest quality of rubber materials and a precise manufacturing tolerance.

This rubber material carries a 5-year limited manufacturer warranty, so it should provide a similar longevity compared to the original rubber tiles to which the reducer will connect.
The reducer consists of recycled rubber crumbs, which delivers a high level of durability and performance. Recycled rubber is perfectly safe to use as heavy duty flooring.

This product is made from 88% recycled rubber material from post-consumer sources.

Installation Subfloor Options

When installing tiles wall to wall you can use dowel pins. Tiles can be installed over concrete, wood, tiles and carpeted floors, using this method.

For a glue down installation, acceptable subsurface types are concrete, wood subfloors.

Not considered to be suitable underlayments, particleboard, chipboard, Masonite, and Lauan.

Disclaimer:

Rubber tiles will expand and contract slightly, depending on whether the tiles receive exposure to varying temperatures, sunlight or humidity. Because of the changes in size of the tiles when exposed to sunlight, it's not recommended to install these tiles outdoors.

Maintenance

Sweep, dust mop or vacuum. Damp mop with microfiber mop or an auto scrubber with a soft nylon brush. Use Diversey Profi Floor Cleaner and Grease Remover detergent and dilute with water. Vacuum up rinse water. Allow to dry before foot traffic.

Shipping

Ships via freight delivery shrink wrapped on pallets.

Please review our shipping disclaimer.