NOTE: This item is a custom order and is not returnable.

• The backing consists of a 7/16-inch Georgia Pacific Blue Ribbon® oriented strand board. It’s third-party certified to the Sustainable Forestry Initiative® procurement standard and free of added urea formaldehyde resins.
• The foam layer is a two-inch polyurethane foam that meets ASTM 2440 protective standards. This foam is dimensionally stable.
• The cover is a high-performance woven polyester VCM acoustically transparent cover, designed to allow sound energy to pass through the cover and be absorbed by the foam core.
• The woven polyester cover is GREENGUARD Gold Certified. It’s also fire retardant and mildew resistant.
• ASTM 2440 Impact Rating of 108 GMax and 211 HIC
• This product has been tested in accordance with CDPH
• 01350 v1.2 VOC emissions evaluation requirements and qualifies for the LEEDv4.1 EQ credit: Low-emitting materials.
• Wall pads are tested in accordance with ASTM C423: Noise Reduction Coefficient (NRC): 1.05 and Sound Absorption Average (SAA): 1.06

Sound Absorption Properties

The Noise Reduction Coefficient (NRC) is the standard metric for measuring how much sound a surface absorbs. These acoustic wall pads are estimated to achieve an NRC rating up to 1.05* meaning that the pads will absorb over 100% of the sound energy that hits them across the speech frequency spectrum. The extra 5% comes from the edges capturing sound.

Basic wall pads will bounce sound off the vinyl surface material, creating echoes. Adding these gym wall panels will reduce echo time (RT60), improving speech clarity. The wall panels will prevent noise build-up.

You can choose to install the CourtQuiet Wall Pads in a room or gymnasium if you need to reduce the sound greatly. Also, choosing to pair these pads with the Safety Wall Pads can reduce the sound where you may not need all the wall pads to absorb sound.

*Sound absorption was tested with the Z-clip installation method. Actual sound absorption performance may vary based on method of installation and site conditions.

Nailing Margin Installation Method

The wall pads include a 1-inch lip on the top and bottom, allowing the pads to be directly screwed to the wall. This is the most common method for permanently installing wall pads and is also the easiest option for DIY installation.

Choose Custom Wall Padding with Greatmats

Wall pads are available to be ordered in custom sizes to fit gymnasiums, fitness and martial arts studios, recreation centers, wrestling rooms, healthcare centers, stages, and other facilities. Custom graphics and logos can also be incorporated to create a professional, branded appearance.

Wall pads are custom fabricated to accommodate outlets, switches, door hardware, fire extinguishers, and other wall-mounted fixtures while maintaining continuous protective coverage. This is typically referred to as a 'cut out'. Cut outs can also be completed DIY-style with cutout inserts which are available in a 4x6 and 6x6 inch size to fit standard outlets and light switches.

Let our wall pad experts help you find the right solution for your facility. Contact us at 877-822-6622 for a customized quote or submit a quote request directly from the product page.

Maintenance

Wipe clean with a neutral pH cleaner. Clean with hot water using a sponge. Do not soak in water.

Shipping

Ships via freight delivery shrink wrapped on pallets.

Please review our shipping disclaimer.

WARNING: This product can expose you to chemicals including Lead and/or Phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.