Outdoor Field Wall Padding with Z Clip 7 ft x 4 ft
Outdoor Field Wall Padding with Z Clip, 7x4 ft For Wood and Concrete Walls
Top Features for Outdoor Field Wall Padding with Z Clip 7 ft x 4 ft
- Made in the USA
- Moisture resistant, matching backer board
- UV resistant 18 oz. vinyl covers
- Large selection of color choices
- Z Clip attachment method for concrete and wood walls
- 3 inch thick high impact polyurethane foam
- Class A flame retardant
- Graphics and chain link fence installation options available
Wood or concrete stadium walls, Outdoor track arenas, Outdoor concession stands
Wipe down as needed.Shipping
Ships via freight delivery shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
NOTE: This item is a custom order and is not returnable.
Featuring a tear and abrasion resistant 18 oz vinyl, our Outdoor Field Wall Padding with Z Clip 7 ft high x 4 ft wide for masonry and wood walls will provide safety for outdoor athletes and fans alike.
Our manufacturer has installed padding in hundreds of venues around the world and is the industry leader, offering site specific safety with customizing capabilities. Outdoor Field Wall Padding with Z Clip is available in a variety of sizes and colors, for a custom design. In addition, optional custom digital graphics and/or lettering is available with our Outdoor Field Wall Padding with Z Clip with Graphics products.
Backing: 5/8 inch moisture resistant composite backerboard. All sides are stained and sealed with an exterior grade finish.
- 18 oz per sq. yard laminated vinyl, unbalanced coating
- Fabric: 1000 Denier polyester basic fabric
- Tear strength test: warp 85 lbs., fill 83 lbs.
- Tensile strength: warp 221 lbs., fill 216 lbs.
- Weft insertion: 9 x 9
- Superior UV inhibitors
- Cold crack: minus 20 degrees Fahrenheit
- Class A flame retardant
- Vinyl cover is wrapped around the backside of the plywood and stapled every 3 inches with stainless steel staples.
- Each pad has 3 weep holes to evacuate moisture
Filler Foam: 3 inch high impact foam. Filler foam is glued to plywood backing
Adhesive: Synthetic resin rubber base adhesive, high flexibility factor, water resistant, heat & cold resistant, high bonding factor
Attachment: Aluminum extrusion, 2.5 inches wide x .125 inch thick, mounted to the backer panel using 1/4 x 3/4 inch stainless bolts screwed into 1/4 inch threaded washer inserts.
|Material Type||Vinyl covered Foam|
|SF per Item||28.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||18|
|Interlock Loss||0.00 feet|
|Surface Finish||Smooth flat|
|Surface Design||Solid color|
|Installation Method||Z Clip|
|Border Strips Included||No|
|Manufacturer Warranty||1 year limited|