LonMat UV Vinyl Rolls 6 x 30 Ft

LonMat UV 6 Install 1
/images/lonseal/lonmat-uv-install-1.jpg
LonMat UV 6 Install 2
/images/lonseal/lonmat-uv-install-2.jpg
LonMat UV 6 Beige Marble full
/images/lonseal/lonmat-uv-beige-marble-full.jpg
LonMat UV 6 Blue Marble full
/images/lonseal/lonmat-uv-blue-marble-full.jpg
LonMat UV 6 Gray Marble full
/images/lonseal/lonmat-uv-gray-marble-full.jpg
LonMat UV 6 Green Marble full
/images/lonseal/lonmat-uv-green-marble-full.jpg
Be the first to review this product
$1,213.80/roll
Save 15%
$6.74/sqft
Reg: $1,428.00/roll
Handling Time Estimate: 4-6 Working Days
  • Electrocution protection
  • Used by the Military and NATO
  • Meet MIL-DTL-15562G, Type I specifications
  • See More Details
  • Beige Marble
  • Blue Marble
  • Gray Marble
  • Green Marble

Please select a swatch from above

How Much Flooring Do I Need?
Request Sales Quote
Please Call for Sample Options

Similar Products

  1. Electrocution protection
  2. Used by the Military and NATO
  3. Meet MIL-DTL-15562G, Type I specifications
  4. Fire retardant
  5. Long lasting marbleized surface
  6. UV cured finish
  7. Easy to maintain
  8. 6 ft width

Military

NOTE: This item is a custom order and is not returnable.

LonMat® UV, fire-retardant, electrically insulated surface

is a sheet vinyl, commercial grade, fire retardant, electrically-insulating flooring product that has been used by countless naval vessels’ high-voltage areas for decades.

This safety switchboard mat protects workers from electrocution by distributing the path to ground. It’s a long-lasting, marbelized, lonseal flooring solution that meets the U.S. military and NATO switchboard matting MIL-DTL-15562G, TYPE 1 specifications and regulations. It features an advanced, UV-cured urethane finish that eases maintenance.

This UV military flooring is specially designed to prevent electric shock around any high voltage electrical equipment. This may include fuse boxes and control panels - to name a few. Electricity can sometimes be a major hazard if grounding flooring isn’t in place to prevent electrocution, fires, and more. The LonMat military flooring rolls are frequently employed on ship decking and by electrified equipment when maintenance and operational personnel are working, and they are known for their water-tight integrity with heat-welded seams.

LonMat® Military Flooring Specs

These LonMat UV military flooring rolls are 6 feet wide by 30 feet in length. They are 0.128 inches thick, and they have a wear layer thickness of 0.048 inches. They have a weight of 1.1 pound per square foot, for a total weight of 200 pounds per roll.

The military flooring rolls have a marbled pattern and have a smooth finish. They are available in beige marble, blue marble, green marble, and gray marble.

This LonMat marble vinyl flooring roll meets MIL-DTL-15562G, Type II, and features a GreenAir® (low VOC) formulation. This product is one of the finest quality, eco-conscious products available with little effects on the environment. It meets the highest industry standards in manufacturing and distribution. It’s made by an environmentally-conscious manufacturer and provides the most functional, sustainable, and durable military specialty flooring products available. It has the lowest VOC properties of any vinyl flooring product on the market.

LonMat® Marble Vinyl Flooring Roll - Installation



For current installation documents from Lonseal, please visit the Lonseal website, click here.

For General Lonseal Installation Information click here.

LonMat® Military Flooring Roll - Cleaning & Maintenance



To get the best performance and appearance from your military flooring roll, simply follow this cleaning and maintenance process.

Initial Maintenance:


  1. Make certain the proper installation method has been followed

  2. After installation has been completed, wait 48 hours before beginning initial maintenance.

  3. Using a microfiber dust mop, clean the flooring. Vacuum the floor to first pick up any large particles.

  4. Using a properly diluted neutral pH cleaner, scrub the floor with a TASKI Contact Pad on a slow speed (175 – 300 RPM) rotary floor machine or auto-scrubber, vacuuming up any remaining cleaning solution.

  5. Then, use clean water and a clean microfiber mop pad to remove any remaining residue.


Daily/Routine Maintenance:


  1. Remove all dirt, soil, and residue. Take care if using a scraper or putty knife to avoid permanently damaging the surface of the flooring.

  2. Using a microfiber dust mop, clean the flooring. If needed, first vacuum it to pick up any large particles.

  3. Use a properly diluted neutral cleaner to the surface using a microfiber wet mop pad.

  4. You can always use clean water and a clean microfiber mop pad to remove any remaining residue.


Periodic Maintenance:


  1. Remove all soiling, dirt, food, debris, and residue. If using a scraper or putty knife, be sure to avoid permanently damaging the surface of the flooring.

  2. Use a microfiber dust mop to clean the flooring. Vacuum the floor to first pick up any large particles, if necessary.

  3. Use a neutral pH cleaner that has been properly diluted. Scrub the floor with a red buffing pad on a slow speed (175 – 300 RPM) rotary floor machine or auto-scrubber, vacuuming up any remaining cleaning solution. If intending to revitalize the gloss of the floor, substitute a spray buff for the neutral pH cleaner.

  4. You can always use clean water and a clean microfiber mop pad to remove any remaining residue.


LonMat® by LonSeal® - The Best Electrically Insulated Flooring Solution



This top notch, commercial grade military product is a solution that performs great and looks fabulous. It offers a level of safety and injury prevention, and it is suitable for so many applications. For more information, reach out to the customer service team at Greatmats. They can answer your questions and offer assistance placing your order.

FEATURES (data shown is nominal):
Roll size 6': 6 ft. (1.8 m) wide x 30' (9.1 m) length
Overall Thickness: 0.128 in. (3.2 mm)
Wear Layer Thickness: 0.048 in. (1.2 mm)
Weight: 1.1 lbs./sq. ft. (5.1 kg/m²)

MEETS MIL-DTL-15562G, Type I

Pattern: Marbled
Finish: Smooth
Width: 6 ft. (72 in.) (1.8 m)

Green Specs: MIL-DTL-15562G

Glazing of the welding thread is required.

Shipping

Ships via freight delivery

This Product Ships Freight Only.
Please review our shipping disclaimer.

WARNING: This product can expose you to chemicals including Lead and/or Phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

SKU# LS-lonmatuv6
In Stock Yes
Product Type Roll
Material Type Vinyl
Product Edging Straight
Thickness 3.2 mm
Width 6.00 feet
Length 30.00 feet
SF per Item 180.00
Weight 200.00 lbs
Packaging Shrink Wrapped on Pallets
Number of Pieces per Package Type 9
Non Absorbent No
Special Adhesives No
Interlock Loss 0.00 feet
Interlocking Connections No
Made In Japan
Surface Finish Smooth
Surface Design Marble
Installation Method Glue down, weld seams
UV Treated No
Reversible No
Border Strips Included No
Floor Score No
Green Label No
Manufacturer Warranty Limited manufacturer warranty
Welding Thread 500 LF - LonMat UV
Welding Thread 500 LF - LonMat UV $158.95 /roll $187.00

Currently, there are no questions for this product.

RELATED PRODUCTS

alt=
/images/lonseal/lonmat-uv-install-1.jpg
alt=
/images/lonseal/lonmat-uv-install-2.jpg
alt=
/images/lonseal/lonmat-uv-beige-marble-full.jpg
alt=
/images/lonseal/lonmat-uv-blue-marble-full.jpg
alt=
/images/lonseal/lonmat-uv-gray-marble-full.jpg
alt=
/images/lonseal/lonmat-uv-green-marble-full.jpg