Rubber Flooring Roll Geneva 8 mm 10% Color 35 LF

Gym Flooring, Weight Room Flooring, Golf Areas, Indoor Ice Skating Rinks, Warehouse and Industrial Floors

NOTE: This item is a custom order and is not returnable.

Rubber Flooring Roll Geneva 8 mm 10% Color 35 LF

Rubber Flooring Roll Geneva 8 mm 10% Color 35 LF the fleck is a high quality rubber flooring option for home and professional gym floors. 8 mm thickness is just under 3/8 inch thickness. 10% color fleck in a black base of rubber material.

Made in the USA and consists of 85% post-consumer recycled material.

Installation:
Rubber rolls are relatively easy to install. Lay the rubber rolls directly over concrete, ceramic tile, or any smooth, hard, flat surface. For a wall-to-wall installation, simply unroll the rubber roll and cut the lengths to fit using a straightedge and a utility knife as needed. Rubber rolls are factory cut with precision so they will lay side-by-side with no gaps between rolls. The ends of the rolls are not cut square and will require trimming during installation.

For installation use double-sided floor tape or adhesive to attach the rubber rolls to a clean, hard floor surface. When using a tape-down method the rolls should be taped around the perimeter and at the seams. Rubber rolls can be dry-laid in small installations under 400 SF.

General Rubber Flooring Roll Information:
Rubber flooring rolls are an economical rubber flooring option for home and professional flooring installations.

Also available are rubber flooring rolls in pre-cut lengths of 25 and 50 linear feet in 1/4 inch, 8 mm, and 3/8 inch thickness, in all black and common 10% color fleck.

Rubber flooring rolls are available in all black, black with 10 percent color fleck, black with 20 percent color fleck and custom runs up to 90 percent color fleck. Custom color runs are available. Reground rubber flooring rolls are an option at discounted pricing. Confetti color includes color flecks that vary from roll to roll. Regrind confetti rolled rubber is a cost saving to all black material and provides an economical option to obtain some color in the rubber flooring. Colors and color percentages will vary from roll to roll and from lot to lot. No guarantee of which color or the amount of color will be present in the rubber flooring material is made.

Rolls of rubber are available in thicknesses from 2 mm up to 1/2 inch thickness.

Rolled rubber is not a fatigue-relief flooring product. It is hard like a car tire and will not provide a cushion for aerobic activities. For those activities, please see our Aerobics Flooring category page.

Avoid getting this rolled rubber product wet. Although very non-porous, this rubber material will absorb water over time when submerged repeatedly or power-washed on a regular basis. To dry this rubber material, it is best to elevate the material off the ground or hand dry.

We have professional and knowledgeable sales staff ready to assist with questions, volume discount quotes, and samples.

Find rubber rolls in all thicknesses and color options available at the best prices anywhere. We offer great shipping rates on rubber flooring rolls, we ship rubber flooring rolls from locations nationwide.

Thickness size tolerance plus or minus .02 inches
4 ft width size tolerance plus or minus 1/4 inch

Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In some cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified linear footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run.

Maintenance

Always use neutral Ph cleaner on rubber flooring. Damp mop with hot water.

Shipping

Ships via freight delivery, shrink wrapped on pallets

This Product Ships Freight Only.
Please review our shipping disclaimer.

SKU#	AM8mm10Color35ft
In Stock	Yes
Product Type	Roll
Material Type	Rubber
Product Edging	Straight
Thickness	8 mm
Width	4.00 feet
Length	35.00 feet
SF per Item	140.00
Weight	259.00 lbs
Packaging	Shrink Wrapped on Pallets
Number of Pieces per Package Type	9
Non Absorbent	Partial
Special Adhesives	Yes
Universal Interlock	No
Interlock Loss	0.00 feet
Material Hardness	Shore A 62
Interlocking Connections	No
Made In	USA
Surface Finish	Smooth flat
Surface Design	Color fleck
Installation Method	Dry lay, tape or glue down on hard flat surface
UV Treated	No
Reversible	Yes
Border Strips Included	No
LEED Points	Yes
Manufacturer Warranty	5 year limited