Horse stall mats are an ideal way to provide a safe, non-slip surface for horses, horse owners, and horse trainers. With our pre-cut 12x12 horse stall kits, customers have everything they need to create flooring in 12x12 horse stalls. This product consists of six 4x6 foot x 3/4 inch mats.
Rather than trying to cut mats to fit the space precisely, our 12x12 stall kits allow you to finish the DIY job in your barn quickly.
Each mat has interlocking edges on one or more sides, meaning they only go together a certain way. This simplifies installation and ensures that the final layout has flat edges on the exterior of the thick rubber horse stall kits for sale.
Multiple Use Cases Around Horses
Because of the durable, waterproof material, you can set up our matting for 12x12 horse stalls for sale in a range of areas in the barn, including:
Inside a stall
Inside a foaling stall
In a grooming area
In a wash bay
Along an aisle way
Some customers use our stall kit outside a door where mud often forms. Horse mats provide a safe, non-slip surface that is the best way to keep humans and horses safe in soggy soil.
Cobblestone Look Surface Horse Stall Mats
The top surface of the rubber has a non-skid texture that resembles cobblestones or pebbles. Black rubber mats are naturally slip resistant, but our added texture gives you an even surer footing.
Additionally, there’s no chance of one of the seams popping up and creating a trip hazard. The manufacturer’s precise cutting of the interlocking edges ensures tight fitting seams that will remain connected without requiring glue.
Long Lasting Horse Stall Mats
Customers looking for a good value in their horse stall mats will appreciate the ability to cover a large space at a cost that fits into almost any budget.
Each of these Made in the USA rubber mats measures 3/4 inches in thickness, supporting the weight of large horses comfortably without buckling. Our horse stall kits carry a 12-year limited manufacturer warranty, enhancing the value you receive.
These mats are around 100 pounds and 4x6 foot in size, so two to four people may be needed for installation. Plan accordingly when installing these mats.
Shipping horse stalls kits can be expensive for a large barn, which is why we work hard to seek the best possible shipping costs for our customers. Reach out to the Greatmats customer service team for help with shipping costs.
Currently, there are no questions for this product.
1 star ratings
5 star
0%
4 star
100%
3 star
0%
2 star
0%
1 star
0%
Reviews with Images
Michael (Reading, PA)
01/05/2024
Good quality rubber and thickness, interlocking fit is great, and overall they are worth it for the price. However we found that the outer dimensions of the mats (the distance of the straight edge(s) from the interlocking edges) varied by 1/2 to 1 inch between pieces, resulting in a varied gap between the mat and wall in some places. Basically they are taking plain 4x6 mats and cutting the interlock into them, but NOT recutting the existing straight edges. So if placement on the machine varies the outer dimension will vary. But as I said, the good news is the interlocking parts that are water jet cut do fit GREAT which is the part that matters most. Overall we would buy these again if needed. Also we received an extra center piece in lieu of a corner piece. Since the 11.8x11.8 overall size had to be trimmed down to fit our 11.5x11.5 stalls anyway, it was easier to trim the extra center into a corner piece instead of dealing with refusing the delivery and waiting for another shipment and so on. But a it was a good reminder to check the goods before acceptance (like they tell you to) especially if you are using them in a space that does not require cutting to size. When moving these around, use care not to snag an interlock on the pallet or the door frame of a barn for example, as they are very heavy and have a lot of momentum and you may rip an interlocking tab right off. This is not any fault of the product, just general advice.
Customer Rating:
01/05/2024
Good quality rubber and thickness, interlocking fit is great, and overall they are worth it for the price. However we found that the outer dimensions of the mats (the distance of the straight edge(s) from the interlocking edges) varied by 1/2 to 1 inch between pieces, resulting in a varied gap between the mat and wall in some places. Basically they are taking plain 4x6 mats and cutting the interlock into them, but NOT recutting the existing straight edges. So if placement on the machine varies the outer dimension will vary. But as I said, the good news is the interlocking parts that are water jet cut do fit GREAT which is the part that matters most. Overall we would buy these again if needed. Also we received an extra center piece in lieu of a corner piece. Since the 11.8x11.8 overall size had to be trimmed down to fit our 11.5x11.5 stalls anyway, it was easier to trim the extra center into a corner piece instead of dealing with refusing the delivery and waiting for another shipment and so on. But a it was a good reminder to check the goods before acceptance (like they tell you to) especially if you are using them in a space that does not require cutting to size. When moving these around, use care not to snag an interlock on the pallet or the door frame of a barn for example, as they are very heavy and have a lot of momentum and you may rip an interlocking tab right off. This is not any fault of the product, just general advice.
Rate product
View Installation Instructions
(5)
(2)
