Cushion Trax Anti-Fatigue Mat 9/16 Inch x 2x3 Ft.
- Vinyl laminate surface for improved traction
- Dense closed cell PVC foam base for maximum comfort
- RedStop non-slip backing keeps mats from slipping on smooth floors
- See More Details
- Vinyl laminate surface for improved traction
- Dense closed cell PVC foam base for maximum comfort
- RedStop non-slip backing keeps mats from slipping on smooth floors
- UniFusion bonded top layer fused to base to prevent separation
- Beveled edges on all 4 sides to reduce tripping hazards
- Vinyl top is made from 100% recycled material
- Diamond plate texture provides added traction
- Certified by the NFSI
Manufacturing plants, Assembly lines, Picking, packing and logistics warehouses, Individual workstations. Commercial, Hotels, Reception desks, Shop counters, Department stores, Banks, Restaurants, Cashiers
NOTE: This item is a custom order and is not returnable.
technology creates a seamless, single-piece bond that is guaranteed for the lifetime of the mat.
Ideal for medium-duty dry areas where workers have to stand for extended periods of time. Featuring a diamond vinyl plate surface made from 100% recycled materials that provides excellent traction, this industrial floor mat provides a soft yet supportive surface for long periods of standing. Designed with a dense closed-cell PVC foam base to help relieve leg and back discomfort for workers while insulating against cold floors.
The beveled edges on our safety mat facilitate a smooth transition from the mat to the floor, minimizing tripping risks. Built for longevity, the exclusive UniFusion bonded top layer fuses the surface to the base, preventing separation for the life of the mat. Notrax Cushion Trax™ is certified by the National Floor Institute to meet the toughest requirements of todays industrial applications.
Length: 3 ft
Thickness: 9/16 inch
Sq ft: 6
Weight: 7.8 lbs
Test Data:
Compression Deflection - .553 inch (40 lbs/sq. inch)
Coefficient of Friction – ASTM D3884-01
Elongation- ASTM D412
Tear Strength: ASTM D1004, – Test speed: 2 inch minute, Avg. tear strength – 16.3 lbs
Hardness – ASTM D2240 – A-78
Critical Radiant Flux – ASTM E648-94A - .46 watts/square cm
Chemical Resistance
Use of product in environments specified as “Useable, not recommended” or “Not recommended” will void warranty. Ratings are intended to be used as a guide only. Actual results may vary depending on concentration of chemicals.
Recommended:
Ammonium Hydroxide (30%), Benzoic Acid, Boric Acid, Butter, Butyl Alcohol (butanol), Carbon Monoxide, Corn Oil, Cottonseed Oil, Cyclohexanol, Ethane, Ethylene glycol (antifreeze), Formaldehyde (37%), Formic Acid, Glucose, Glycerin, Hydrazine, Hydrogen Peroxide, Iodine, Methyl Alcohol (Methanol), Methyl Methacrylate, Peanut Oil, Phosphoric Acid, Potassium Hydroxide (50%), Propane, Silicates, Silver Nitrate, Sodium Bicarbonate, Sodium Hydroxide (0.34%), Sodium Hypochlorite (Bleach), Sulfuric Acid (<10%), Sulfuric Acid (10-75%), Vegetable Oil, Vinegar (5% Acetic Acid)
Suitable for Use:
2-Propanol (Isopropyl Alcohol), Acetic Acid (50%), Beef Fat, Bromine, Calcium Chloride, Calcium Hydroxide, Chicken Fat, Citric Acid (10%), Fuel Oil, Gear Oil (85w-140), Heptane, Hydraulic Fluid, Hydrochloric Acid (30%), Linseed Oil, Methane, Motor Oil (10w-30 natural and synthetic), Naptha, Nitric Acid (20%), Nitric Acid (Concentrated), Octane, Oxalic Acid, Pentane, Petroleum, Power Steering Fluid, Propyl Alcohol (Propanol), Sodium Hydroxide, Stearic Acid, Transmission Fluid
Useable, not-recommended:
Acetaldehyde (50%), Acetone, Amyl Acetate, Butane, Butyl Acetate, Chromic Acid (50%), Dibutyl Phthalat, Diesel Fuel, Diesel Oil, Dibutyl Phthalate, Ethyl Acetate, Ethyl Alcohol (Ethanol), Ethyl Ether, Gasoline, Hexane, Hydrofluoric Acid (30%), Jet Fuel, Kerosene, Methyl Formate, Mineral Oil, Mineral Spirits, Oleic Acid, Perchloroethylene, Pine Oil (20%=Pine-Sol)
Not recommended:
Acetic Acid (Glacial), Acetic Anhydride, Aniline, Benzene, Benzyl Alcohol, Brake Fluid, Carbolic Acid (Liquid Phenol), Carbon Tetrachloride, Chloroacetone, Chloroform, Cyclohexane, Cyclohexanone, Dioctyl Phthalate (DOP), Lacquers, Methyl Ethyl Ketone (MEK), Methyl Isobutyl Ketone (MIBK), Methylene Chloride, Nitrobenzene, Pine Oil (100%), Propylene Dichloride, Styrene, Sulfuric Acid (Concentrated), Tetrahydrofuran (THF), Toluene (Methyl Benzene), Trinitrobenzene, Turpentine, Xylene
Cushion Trax, UniFusion and RedStop are registered trademarks of NoTrax
Maintenance
Sweep regularly or dry mop the surface and the back of the mat. The surface can be damp-mopped with a mild soap/detergent.
Shipping
Ships ground delivery, larger orders on pallets via freight delivery.
Please review our shipping disclaimer.
WARNING: This product can expose you to chemicals including Lead and/or Phthalates, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
| SKU# | 479S0023 |
| In Stock | Yes |
| Product Type | Mat |
| Material Type | PVC/Vinyl |
| Product Edging | Straight |
| Thickness | 9/16 inch |
| Width | 2.00 feet |
| Length | 3.00 feet |
| SF per Item | 6.00 |
| Weight | 7.80 lbs |
| Packaging | Cartons |
| Non Absorbent | No |
| Special Adhesives | No |
| Interlock Loss | 0.00 feet |
| Interlocking Connections | No |
| Made In | USA |
| Surface Finish | Diamond |
| Surface Design | Solid color |
| Installation Method | Lay flat |
| UV Treated | No |
| Reversible | No |
| Border Strips Included | No |
| Indoor or Outdoor | Indoor |
| Manufacturer Warranty | 3 year limited manufacturer |