Sof-Tred Anti-Fatigue Mat 3/8 Inch x 2x3 Ft.
Be the first to review this product
$20.26/mat
Save 20%
$3.38/sqft
Reg: $25.62/mat
Handling Time Estimate: 2-3 Weeks
- Embossed pebble-texture creates anti-slip surface
- Provides traction for dry applications and enhances safety
- Closed cell PVC foam relieves leg and back discomfort
- See More Details
- Embossed pebble-texture creates anti-slip surface
- Provides traction for dry applications and enhances safety
- Closed cell PVC foam relieves leg and back discomfort
- Beveled edges on all 4 sides to reduce tripping hazards
- Provides insulation against cold floors
- 3/8 inch thickness provides basic anti-fatigue relief
- Surface texture is molded into foam base, reducing risk of cracking
- Cost-effective and budget-friendly solution for worker comfort
Manufacturing plants, Assembly lines, Picking, packing and logistics warehouses, Individual work stations, Light duty work area
NOTE: This item is a custom order and is not returnable.
Enhance your work environment with the NoTrax Sof-Tred™ mat. The anti fatigue mats are designed to improve both comfort and safety in industrial and commercial settings. Ideal for dry areas where workers have to stand for extended periods of time. Designed with a pebbled surface for increased traction, our industrial floor mat creates a slip-resistant surface for additional safety.
Featuring closed-cell PVC foam to help relieve leg and back discomfort for workers while insulating against cold floors. The beveled edges on our safety mat facilitate a smooth transition from the mat to the floor, minimizing tripping risks. Built for longevity, our mats surface is molded into the foam base, preventing cracking and breaking in high traffic environments.
Width: 2 ft
Length: 3 ft
Thickness: 3/8 inch
Sq ft: 6
Weight: 3.18 lbs
Abrasion resistant – ATSM D3884-01: 33.62% measured in weight loss
Static Coefficient of friction – ASTM C-1028-96: Dry 80
Tear strength – ASTM D-1004-94a-03: 7.0 lbs
Elongation/Tensile – ASTM D412: 81.5 lbs per square inches
Durometer (Shore A) ASTM D2240-02: 15
Featuring closed-cell PVC foam to help relieve leg and back discomfort for workers while insulating against cold floors. The beveled edges on our safety mat facilitate a smooth transition from the mat to the floor, minimizing tripping risks. Built for longevity, our mats surface is molded into the foam base, preventing cracking and breaking in high traffic environments.
Width: 2 ft
Length: 3 ft
Thickness: 3/8 inch
Sq ft: 6
Weight: 3.18 lbs
Abrasion resistant – ATSM D3884-01: 33.62% measured in weight loss
Static Coefficient of friction – ASTM C-1028-96: Dry 80
Tear strength – ASTM D-1004-94a-03: 7.0 lbs
Elongation/Tensile – ASTM D412: 81.5 lbs per square inches
Durometer (Shore A) ASTM D2240-02: 15
Custom Sizes Available
Custom lengths are available for the Sof-Tred Anti-Fatigue Mat in 2-foot, 3-foot, 4-foot, 5-foot wide mats. Please contact us for a quote on custom products.
Chemical Resistance
Use of product in environments specified as “Useable, not recommended” or “Not recommended” will void warranty. Ratings are intended to be used as a guide only. Actual results may vary depending on concentration of chemicals.
Recommended:
Ammonium Hydroxide (30%), Benzoic Acid, Boric Acid, Butter, Butyl Alcohol (butanol), Carbon Monoxide, Corn Oil, Cottonseed Oil, Cyclohexanol, Ethane, Ethylene glycol (antifreeze), Formaldehyde (37%), Formic Acid, Glucose, Glycerin, Hydrazine, Hydrogen Peroxide, Iodine, Methyl Alcohol (Methanol), Methyl Methacrylate, Peanut Oil, Phosphoric Acid, Potassium Hydroxide (50%), Propane, Silicates, Silver Nitrate, Sodium Bicarbonate, Sodium Hydroxide (0.34%), Sodium Hypochlorite (Bleach), Sulfuric Acid (<10%), Sulfuric Acid (10-75%), Vegetable Oil, Vinegar (5% Acetic Acid)
Suitable for Use:
2-Propanol (Isopropyl Alcohol), Acetic Acid (50%), Beef Fat, Bromine, Calcium Chloride, Calcium Hydroxide, Chicken Fat, Citric Acid (10%), Fuel Oil, Gear Oil (85w-140), Heptane, Hydraulic Fluid, Hydrochloric Acid (30%), Linseed Oil, Methane, Motor Oil (10w-30 natural and synthetic), Naptha, Nitric Acid (20%), Nitric Acid (Concentrated), Octane, Oxalic Acid, Pentane, Petroleum, Power Steering Fluid, Propyl Alcohol (Propanol), Sodium Hydroxide, Stearic Acid, Transmission Fluid
Useable, not-recommended:
Acetaldehyde (50%), Acetone, Amyl Acetate, Butane, Butyl Acetate, Chromic Acid (50%), Dibutyl Phthalat, Diesel Fuel, Diesel Oil, Dibutyl Phthalate, Ethyl Acetate, Ethyl Alcohol (Ethanol), Ethyl Ether, Gasoline, Hexane, Hydrofluoric Acid (30%), Jet Fuel, Kerosene, Methyl Formate, Mineral Oil, Mineral Spirits, Oleic Acid, Perchloroethylene, Pine Oil (20%=Pine-Sol)
Not recommended:
Acetic Acid (Glacial), Acetic Anhydride, Aniline, Benzene, Benzyl Alcohol, Brake Fluid, Carbolic Acid (Liquid Phenol), Carbon Tetrachloride, Chloroacetone, Chloroform, Cyclohexane, Cyclohexanone, Dioctyl Phthalate (DOP), Lacquers, Methyl Ethyl Ketone (MEK), Methyl Isobutyl Ketone (MIBK), Methylene Chloride, Nitrobenzene, Pine Oil (100%), Propylene Dichloride, Styrene, Sulfuric Acid (Concentrated), Tetrahydrofuran (THF), Toluene (Methyl Benzene), Trinitrobenzene, Turpentine, Xylene
Sof-Tred Mat is a registered trademark of NoTrax
Maintenance
Sweep regularly or dry mop the surface and the back of the mat. The surface can be damp-mopped with a mild soap/detergent.
Shipping
Ships ground delivery, larger orders on pallets via freight delivery.
Please review our shipping disclaimer.
| SKU# | 411S0323 |
| In Stock | Yes |
| Product Type | Mat |
| Material Type | PVC/Foam |
| Product Edging | Straight |
| Thickness | 3/8 inch |
| Width | 2.00 feet |
| Length | 3.00 feet |
| SF per Item | 6.00 |
| Weight | 3.18 lbs |
| Packaging | Cartons |
| Non Absorbent | No |
| Special Adhesives | No |
| Interlock Loss | 0.00 feet |
| Interlocking Connections | No |
| Made In | USA |
| Surface Finish | Pebble Pattern |
| Surface Design | Solid color |
| Installation Method | Lay flat |
| UV Treated | No |
| Reversible | No |
| Border Strips Included | No |
| Indoor or Outdoor | Indoor |
| Manufacturer Warranty | 1 year limited manufacturer |
View Specifications Data Sheet RECENTLY VIEWED
RELATED PRODUCTS
(1)