Blade Runner Anti-Fatigue Mat with Dyna-Shield 1/2 Inch x 4x60 Ft.
Be the first to review this product
$1,321.86/mat
Save 20%
$5.51/sqft
Reg: $1,672.15/mat
Handling Time Estimate: 2-3 Weeks
- Wear resistant, tear resistant
- Basic Anti-fatigue mat
- Ergonomic safety mat
- See More Details
- Wear resistant, tear resistant
- Basic Anti-fatigue mat
- Ergonomic safety mat
- Beveled edges
- Slip resistant
- Standing Mat
- Free of DOP, DMF
- Made in the USA
Manufacturing plants, Assembly lines, Picking, packing and logistics warehouses, Individual work stations, Medium duty work area
NOTE: This item is a custom order and is not returnable.
Blade Runner Anti-Fatigue Mat with Dyna-Shield 1/2 Inch x 4x60 Ft. is an industrial mat with lengthwise corrugated ribbed surface.
Blade Runner Anti-Fatigue Mat with Dyna-Shield 1/2 Inch x 4x60 Ft. is constructed to aid with traction it has a corrugated rib top surface that runs the length of the mat providing sure footing and making clean up easy. Dyna-Shield PVC foam is factory-made with a strong protective top layer that is durable and surpasses the competition in tear resistance and tensile strength. Dyna-Shield products are more resistant to wear than conventional sponge matting. Use in medium duty dry work areas.
Width: 4 ft
Length: 60 ft
Thickness: 1/2 inch
Sq ft: 199.2
Weight: 199.2 lbs
Abrasion resistant – ATSM D3884-01
Static Coefficient of friction – ASTM C-1028
Tear resistant – ASTM D-1004-94a-03
Elongation (Avg) – ASTM D-412
Use of product in environments specified as “Useable, not recommended” or “Not recommended” will void warranty. Ratings are intended to be used as a guide only. Actual results may vary depending on concentration of chemicals.
Recommended:
Width: 4 ft
Length: 60 ft
Thickness: 1/2 inch
Sq ft: 199.2
Weight: 199.2 lbs
Abrasion resistant – ATSM D3884-01
Static Coefficient of friction – ASTM C-1028
Tear resistant – ASTM D-1004-94a-03
Elongation (Avg) – ASTM D-412
Chemical Resistance
Use of product in environments specified as “Useable, not recommended” or “Not recommended” will void warranty. Ratings are intended to be used as a guide only. Actual results may vary depending on concentration of chemicals.
Ammonium Hydroxide (30%), Benzoic Acid, Boric Acid, Butter, Butyl Alcohol (butanol), Carbon Monoxide, Corn Oil, Cottonseed Oil, Cyclohexanol, Ethane, Ethylene glycol (antifreeze), Formaldehyde (37%), Formic Acid, Glucose, Glycerin, Hydrazine, Hydrogen Peroxide, Iodine, Methyl Alcohol (Methanol), Methyl Methacrylate, Peanut Oil, Phosphoric Acid, Potassium Hydroxide (50%), Propane, Silicates, Silver Nitrate, Sodium Bicarbonate, Sodium Hydroxide (0.34%), Sodium Hypochlorite (Bleach), Sulfuric Acid (<10%), Sulfuric Acid (10-75%), Vegetable Oil, Vinegar (5% Acetic Acid)
Suitable for Use:
2-Propanol (Isopropyl Alcohol), Acetic Acid (50%), Beef Fat, Bromine, Calcium Chloride, Calcium Hydroxide, Chicken Fat, Citric Acid (10%), Fuel Oil, Gear Oil (85w-140), Heptane, Hydraulic Fluid, Hydrochloric Acid (30%), Linseed Oil, Methane, Motor Oil (10w-30 natural and synthetic), Naptha, Nitric Acid (20%), Nitric Acid (Concentrated), Octane, Oxalic Acid, Pentane, Petroleum, Power Steering Fluid, Propyl Alcohol (Propanol), Sodium Hydroxide, Stearic Acid, Transmission Fluid
Useable, not-recommended:
Acetaldehyde (50%), Acetone, Amyl Acetate, Butane, Butyl Acetate, Chromic Acid (50%), Dibutyl Phthalat, Diesel Fuel, Diesel Oil, Dibutyl Phthalate, Ethyl Acetate, Ethyl Alcohol (Ethanol), Ethyl Ether, Gasoline, Hexane, Hydrofluoric Acid (30%), Jet Fuel, Kerosene, Methyl Formate, Mineral Oil, Mineral Spirits, Oleic Acid, Perchloroethylene, Pine Oil (20%=Pine-Sol)
Not recommended:
Acetic Acid (Glacial), Acetic Anhydride, Aniline, Benzene, Benzyl Alcohol, Brake Fluid, Carbolic Acid (Liquid Phenol), Carbon Tetrachloride, Chloroacetone, Chloroform, Cyclohexane, Cyclohexanone, Dioctyl Phthalate (DOP), Lacquers, Methyl Ethyl Ketone (MEK), Methyl Isobutyl Ketone (MIBK), Methylene Chloride, Nitrobenzene, Pine Oil (100%), Propylene Dichloride, Styrene, Sulfuric Acid (Concentrated), Tetrahydrofuran (THF), Toluene (Methyl Benzene), Trinitrobenzene, Turpentine, Xylene
Blade Runner and Dyna Shield Mat is a registered trademark of NoTrax
Maintenance
Sweep regularly or dry mop the surface and the back of the mat. The surface can be damp-mopped with a mild soap/detergent.
Shipping
Ships via freight delivery, shrink wrapped on pallets.
Please review our shipping disclaimer.
| SKU# | 413R0048 |
| In Stock | Yes |
| Product Type | Mat |
| Material Type | PVC/Foam |
| Product Edging | Straight |
| Thickness | 1/2 inch |
| Width | 4.00 feet |
| Length | 60.00 feet |
| SF per Item | 240.00 |
| Weight | 199.20 lbs |
| Packaging | Cartons |
| Non Absorbent | No |
| Special Adhesives | No |
| Interlock Loss | 0.00 feet |
| Interlocking Connections | No |
| Made In | USA |
| Surface Finish | Corrugated |
| Surface Design | Solid color |
| Installation Method | Lay flat |
| UV Treated | No |
| Reversible | No |
| Border Strips Included | No |
| Manufacturer Warranty | 3 year limited manufacturer |
RECENTLY VIEWED
RELATED PRODUCTS
