In a Snap Peel and Stick Carpet Tiles 3/4 Inch x 18x18 Inches 10 Per Case

Residential, Home, Basements, Bedrooms, Living room, Family room

NOTE: This item is a custom order and is not returnable.

In a Snap Peel and Stick Carpet Tiles 18x18 Inches - Residential carpet tile

In a Snap Peel and Stick Carpet Tiles 3/4 Inch x 18x18 Inches 10 Per Case is manufactured with a quarter inch padding and has all of the features you want as well as being a low cost flooring option. In addition, these residential carpet tiles are quick and easy to install.

Multiple Carpet Patterns Available

Our peel and stick carpet tiles with pad product makes use of a polyester fiber that will hold its color, even after multiple cleanings. The fibers are fade and stain resistant. They will stand up to high traffic areas and rooms with plenty of windows, maintaining the original colors.

Customers can select among four different pattern colors in these squares. The manufacturer offers a few different neutral colors in each random pattern to create the overall look. These tiles will fit nicely in almost any room in the home, as the neutral colors should not clash with the existing decor in the room.

This carpet tile has a 1/2-inch pile height, making it comfortable for a wide range of activities. This is a Made in the USA product, so customers can trust the quality of the materials in use and the manufacturing process.

The padded carpeted squares go nicely over a firm subfloor, such as concrete in a basement or a hard vinyl floor in a bedroom. Each tile has 1/4 inches of padding on the underside, which adds a bit of cushioning for exercise or for sitting on the floor and playing with kids or pets.

Easy-to-Install Carpet Squares

Clean the subfloor before applying the peel and stick carpet tiles with pad. Remove dust and dry debris that could affect the ability of the adhesive to make a secure contact with the subfloor. If you mop the subfloor, allow it to completely dry before beginning the installation.

When preparing to lay out the tiles, the manufacturer recommends placing these tiles in a dry lay layout before removing the protective backing. Using the dry lay first makes it easier to figure out where you may need to make cuts to go around stationary objects or to fit tight to the wall before exposing the adhesive.

Use a utility knife and a straightedge to create a clean cut on the tiles. After making the cuts, the installer then can begin attaching the tiles to the subfloor.

Remove the protective backing from the tile to expose the adhesive. Because the manufacturer applies the glue to the backing at the factory, installers do not have to worry about making a mess by applying adhesive themselves during the install process.

In some instances, the tiles may slide slightly on certain types of subfloors. The adhesive may not be as permanent as you want. In a situation like this, installers can create a more permanent feel to the carpet square installation by adding carpet tape around the perimeter of the layout.

Self Adhesive Residential Carpet Squares Specifications

• Width: 1.5 feet
  
• Length: 1.5 feet
  
• Total thickness: 3/4 inches
  
• Padding thickness: 1/4 inches
  
• Pile height: 1/2 inches
  
• Coverage per tile: 2.25 square feet
  
• Weight per tile: 1.5 pounds
  
• Pieces per carton: 10
  
• Coverage per carton: 22.5 square feet
  
• Color: Rustic Charm, Stonehenge, Crystal, or Ironside

Maintenance and Care

Homeowners and apartment managers appreciate our peel and stick carpet tiles with pad product, as it is easy to clean and maintain. In fact, customers are able to take care of our carpeted squares in the same way they’d care for other types of carpeting.

To perform the most basic cleaning process, start by vacuuming the tiles on a regular basis, just like with a carpeted floor. These self stick carpet tiles have a high level of durability, so they will stand up to regular vacuuming.

For a more thorough cleaning process, customers can perform a DIY job with a carpet cleaning machine. It is best not to over-expose the carpeting to water, but the water resistant backing on the carpet will prevent small amounts of water from leaking onto the subfloor.

Should someone spill liquids on the flooring, customers should clean them immediately. Use a cloth rag and clean water to remove the spill.

Because of the peel and stick backing, customers have the ability to pull up a single tile that has excess soil and clean it separately from the rest of the layout. They could even replace it with a new tile if the old tile will not come as clean as they would like.

Prices subject to change without notice.

Maintenance

Vacuum daily, Spot and stain removal as needed, deep clean periodically with dry foam, dry extraction, and hot water extraction.

Shipping

Ships via ground delivery, larger orders may ship via freight.

Please review our shipping disclaimer.

SKU#	CP-ENG-SQ108-1818
In Stock	Yes
Product Type	Tile
Material Type	Carpet
Product Edging	Straight
Thickness	3/4 inch
Width	1.50 feet
Length	1.50 feet
SF per Item	22.50
Weight	15.00 lbs
Packaging	Cartons
Number of Pieces per Package Type	10
Non Absorbent	Yes
Special Adhesives	No
Interlock Loss	0.00 feet
Interlocking Connections	No
Made In	USA
Surface Finish	Carpet
Surface Design	Pattern
Installation Method	Peel and stick
UV Treated	No
Reversible	No
Border Strips Included	No
Floor Score	No
Green Label	No
Manufacturer Warranty	15 Year Manufacturer Limited Warranty