Rubber Flooring Roll Geneva 1/4 Inch Regrind 50 LF

1. Economical rubber flooring roll option
2. Various colors and amount of color in the mix
3. Extra small flecks
4. Varying colors in rubber material
5. Made in the USA
6. Made from recycled rubber is a green product
7. 4x50 Ft roll size

This product ships from Wisconsin. This 1/4 inch regrind rubber flooring roll is purchased by the roll.

Regrind rolled rubber material is manufactured from second run material that is made from scrap material produced during first runs. The regrind rubber flooring rolls will have a slightly higher density than our standard rolled rubber.

Regrind color is a cost savings to all black and provides an economical option to obtain some color in the rubber flooring. Regrind rolled rubber is a cost savings to all black material and provides an economical option to obtain some color in the rubber flooring. Colors and color percentage are inconsistent and will vary from roll to roll and from lot to lot. No guarantee of which color or the amount of color will be present in the rubber flooring material.

Rolled rubber flooring is a popular option in homes, schools and professional gym floors and weight room areas. Rolled rubber is a great product for protecting floors from free weights and exercise equipment. Rubber flooring in rolls will act as a sound dampener and as a floor protector. Rolls of rubber flooring are a low cost resilient rubber flooring option.

Made in the USA from recycled rubber content. This is a reground second run product and priced accordingly. Skiving markings may be more noticeable with this product.

Installation:
Rubber rolls are relatively easy to install. Lay the rubber rolls directly over concrete, ceramic tile, or any smooth, hard, flat surface. For a wall to wall installation, simply unroll the rubber roll and cut the lengths to fit using a straightedge and a utility knife as needed. Rubber rolls are factory cut with precision so they will lay side-by-side with no gaps between rolls. The ends of the rolls are not cut square and will require trimming during installation.

For installation use double sided floor tape or adhesive to attach the rubber rolls to a clean, hard floor surface. When using a tape down method the rolls should be taped around the perimeter and at the seams. Rubber rolls can be dry laid in small installations under 400 SF.

General Rubber Flooring Roll Information:
Rubber flooring rolls are an economical rubber flooring option for home and professional flooring installations.

Rubber flooring rolls is available in pre-cut lengths of 25 and 50 linear feet in 8 mm and 3/8 inch thickness, in all black and common color fleck.

Rubber flooring rolls are available in all black, black with 10 percent color fleck, black with 20 percent color fleck and custom runs up to 90 percent color fleck. Custom color runs are available. Reground rubber flooring rolls are an option at discounted pricing. Regrind rubber includes color flecks that vary from roll to roll. Reground material in general is the most affordable rolled rubber flooring option.

Rolls of rubber are available in thicknesses from 2 mm up to 1/2 inch thickness.

Rolled rubber is not a fatigue relief flooring product. It is hard like a car tire and will not provide cushion for aerobic activities. For those activities, please see our Aerobics Flooring category page.

Avoid getting this rolled rubber product wet. Although very non-porous, this rubber material will absorb water over time when submerged repeatedly or power washed on a regular basis. To dry this rubber material, it is best to elevate the material off the ground or hand-dry.

1/4 inch material is recommended to be glued for installations over 500 SF.

We have professional and knowledgeable sales staff ready to assist with questions, volume discount quotes and samples.

Find rubber rolls in all thickness and color options available at the best prices anywhere. We offer great shipping rates on rubber flooring rolls, we ship rubber flooring rolls from locations nationwide.

Thickness size tolerance plus or minus .02 inches
4 ft width size tolerance plus or minus 1/4 inch

Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In come cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified linear footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run.

Maintenance

Always use Neutral Ph cleaner on rubber flooring. Damp mop.

Shipping

Ships via freight delivery, shrink wrapped on pallets.

This Product Ships Freight Only.
Please review our shipping disclaimer.

PDF Documents:

• View Installation Instructions
• View Cleaning and Maintenance
• View Specifications Data Sheet
• View Product LEED Point Document
• View Product MSDS Document