This batting cage turf roll has a width of 15 feet, so it will cover a large space at an indoor batting facility with multiple hitting lanes. It also can go across the entire surface of an indoor training field. Customers can order a custom cut length in the roll, matching the area where they want the installation to occur.


Each roll of turf has a 1/2-inch pile height in the nylon blades, giving them a look that resembles real, tightly cut grass. The nylon blades attach to a 3mm foam backing pad layer, which is about 1/8 inch thick.

This foam layer ensures that the blades will not pull loose when placed under the stress of players running and stepping on them, but it also provides a bit of cushioning when installed over a concrete subfloor.

Our manufacturer uses a high-quality nylon turf blade design that delivers the most realistic look, resembling actual grass, while also being able to stand up to frequent use.

Specifications of Baseball Turf Pro Plus

• Pile Height: 1/2 inch
• Width: 15 Ft.
• Face Weight: 34 oz. per sq. yd.
• Total weight: 110 oz. per sq. yd.
• Primary Yarn: Nylon
• Yarn Denier: 4200/8
• Yarn Cross Section: Serrated Diamond
• Primary Backing: dual polypropylene layers
• Primary backing weight: 6 oz/sq yd
• Secondary coating weight: 70 oz/sq yd
• Tuft bind >8 lbs. D-1335
• Grab tear strength (Average): >200 lbs. - D-5034
• Lead content: <50 ppm - F-2765
• Total yarn linear density: 4,200 Denier - D-1577
• Elongation to break: >60 % - D-2256
• Yarn breaking strength: >19 lbs. - D-2256
• Machine gauge: 3/16 inch D-5793
• Flammability: Pass - D-2859
• All values are plus or minus 5 percent

A minimum of 20 linear feet is required for this product.

Maintenance

Occasionally flush with water if needed

Shipping

Ships via freight delivery only. Please note that customers must be able to hand unload the turf rolls off the truck. Turf rolls are heavy and will require multiple people to unload and move.

Please review our shipping disclaimer.