Horse Stall Mat Classic Interlocking 3/4 Inch x 10x12 Ft. Kit
Be the first to review this product
$410.43/kit
Save 20%
$3.53/sqft
Reg: $513.04/kit
Handling Time Estimate: 3-4 Weeks on Average
- Pre-fitted for easy installation
- Outstanding traction, wet or dry
- 10x12 horse stall mat kit
- See More Details
- Pre-fitted for easy installation
- Outstanding traction, wet or dry
- 10x12 horse stall mat kit
- Non-porous, odor and bacteria resistant
- Tear and crack proof
- Comfort for large animals standing on the mat
- Made from recycled rubber tires
- Easy to clean
Horse Stall, Barn Stall, Stables, Tack Room, Mud Room
NOTE: This item is a custom order and is not returnable.
Horse Stall Mat Classic Interlocking 3/4 Inch x 10x12 Ft. Kits have been pre-fitted to ensure they have tight fit when you install the horse stall kit. The interlocking design of the stall mats provides the tightest fitting rubber horse mats possible.
Made from vulcanized recycled tires, keeping the tires out of landfills. Mats have a high odor and are not intended for home use.
Kit contains:
One (1): 4x6 Ft. interlocking mat, one (1) straight edge border side and three interlocking edges and three (3) 4x6 Ft. corner border mats with two straight edges and two interlocking edges.
Once the entire horse stall mat kit is installed, the 10x12 rubber mat kit is 9 feet 10 inches x 11 feet 9-3/4 inches. This is because each tile loses some coverage due to its interlocks.Made from vulcanized recycled tires, keeping the tires out of landfills. Mats have a high odor and are not intended for home use.
Kit contains:
One (1): 4x6 Ft. interlocking mat, one (1) straight edge border side and three interlocking edges and three (3) 4x6 Ft. corner border mats with two straight edges and two interlocking edges.
The 10x12 horse stall kit has many outstanding features:
Slip resistant providing better traction, wet or dry
Anti-fatigue comfort for animals and people
Noise and vibration absorption
Crack and tear proof
Non-porous helps prevent bacteria and odor from urine
Flat top and bottom, making the mats easy to clean, can be turned over if needed
Stands up to extreme conditions indoor or outdoor
Test Data:
Shore Hardness: ASTM 2240 – 65
Compression Set: ASTM D395 – 8.49%
Taber Abrasion: ASTM C501 - .1725 mg/cycle at 1000 cycles, .1442 mg/cycle at 2000 cycles
Tensile Strength: ASTM D412 – 321 psi
Elongation at Break: ASTM D412 – 180%
Tear Resistance: ASTM D624 – 122.5 lbs/in.
Moisture Absorption: ASTM D570 - .13%
Coefficient of Friction: ASTM C1028 – Dry=1.25, Wet=1.01
Critical Radiant Flux: ASTM E648-03 - .08 Watts/cm2
Maintenance
Sweep and/or hose off as needed. Can be cleaned using a damp mop with a PH neutral cleaner diluted with water. Ensure that any moisture is immediately extracted after cleaning.
Shipping
Ship via freight delivery, shrink wrapped on a pallet
This Product Ships Freight Only.
Please review our shipping disclaimer.
SKU# | 1152192 |
In Stock | Yes |
Product Type | Mat |
Material Type | Rubber |
Product Edging | Interlocking |
Thickness | 3/4 inch |
Width | 9.83 feet |
Length | 11.81 feet |
SF per Item | 116.15 |
Weight | 540.00 lbs |
Packaging | Shrink Wrapped on Pallets |
Non Absorbent | Partial |
Universal Interlock | No |
Interlock Loss | 0.00 feet |
Material Hardness | Shore 65 |
Interlocking Connections | Yes |
Made In | Canada |
Surface Finish | Smooth |
Surface Design | Solid color |
Installation Method | Dry lay |
UV Treated | No |
Reversible | Yes |
Border Strips Included | No |
Manufacturer Warranty | 15 year limited manufacturer warranty |