Matrax Heavy Duty Drivable Composite Mats 4x4 Ft, Diamond pattern

1. Vertical locking system
2. Even load transfer between panels
3. Made in USA, 100 percent recyclable
4. Easy to install
5. Drive and pedestrian friendly
6. Diamond top texture
7. Cam lock system
8. Portable flooring

The separate components of the Matrax Heavy Duty Drivable Composite Mats are a turf protection system, constructed to work with one another to produce a cover system that will shield athletic turf surfaces from the stress of non-sporting events. The interlocking panels are designed to tolerate varying kinds of loads, as well as stage setup, large cranes, fully-loaded tractor trailers and other wheeled vehicles. Easy to install and delivers a safe, sturdy and resilient working surface for events. Using a perpendicular lock system, with a four inch overlap flange that connect the panels together, this creates a level surface that is free of tripping hazards.

A strong nylon material is used for the cam lock element that does not rust or corrode, making for a long service life. The cam lock pin delivers the strength essential to allowing two panels to stay locked together when handling. The interlocking system has five retained fasteners per panel that engaged and disengaged by rotating them ninety degrees with the installation tool provided. Can be used with the Matrax Light Duty Pedestrian Composite Mat 4x4 Ft, offering versatility in configurations.

Optional ADA compliant ramps are available to provide safe movement on and off Matrax mats.

Specs:
Width: 4 ft
Length: 4 ft
Thickness: 1.5 inch
Sq. ft: 16
Usable surface area: 13.5 ft
Weight: 50 lbs
Material: 100% HDPE (high-density polyethylene plastic)
Compression strength: 450 psi
Max wheel load: 300 psi
Max allowable deflection: 3 inch
Surface Dimensions: 4 ft x 4 ft, 1.22 m x 1.22 m
Height: 1.5 in., 38.1 mm
Net Working Surface per Truck: [Based on GVR rating of 80,000 lbs.] 11,340 ft, 21,054 m2
Shipping and Storage: [Max pallet height not to exceed 42 inches] 30 mats / 4 x 4 pallet,60 mats / 4 x 8 pallet
Compression Strength: [Based on an intermittent load on 8 x 8 ft area] 450 psi, 3,100 kps
Maximum Wheel Load: [Rubber tire at < 5 mph with a minimum contact area of 9 in2 over level surface at 72°F] 300 psi, 2,068 kps
Minimum Contact Area for Static Loads: [ > 250 lbs. at 72°F] 16 inch, 210.16 cm2
Maximum Allowable Deflection: 3 inch, 7.62 cm
Temperature Range: [For temperatures out of range, use de-rating. Service Rating Chart] -4 degrees to 113 degrees Fahrenheit, 20 degrees C to 45 degrees Celsius
Burn Rating: [Data is based on the materials used in manufacturing] UL 94-HBN/A

Ask a question about this product