Rubber Flooring Roll 8 mm 10% Color Fleck 4 x 25 Ft
Rubber Flooring Rolls 8 mm 10% Color, Gym Rolled Rubber Floor, 25 ft
Top Features for Rubber Flooring Roll 8 mm 10% Color Fleck 4 x 25 Ft
- Custom cut roll lengths over 25 LF per roll
- Made in the USA
- Low odor rubber flooring option
- Install with tape or glue down, dry lay for home installations
- Color flecks are distributed throughout product & will not wear away
- Recycled rubber content makes this a green product
- May contribute to LEED points
- Non slip when wet, durable resilient rubber surface
Gym Flooring, Weight Room Flooring, Golf Areas, Ice Skating Rinks, Warehouse and Industrial Floors, Rooftop Walkways
Rubber Flooring 25 ft Roll with 10% Color fleck is a high quality rubber flooring option for home and professional gym floors. 8 mm thickness is just under 3/8 inch thickness. 10% color fleck in a black base of rubber material.
Use rolls of rubber flooring for home and and commercial gym floors. This type of resilient rubber flooring product is very durable and long lasting. Made from recycled rubber material this flooring option is considered a green product and may contribute to LEED points in green buildings.
Rolled rubber flooring is a popular option in homes, schools and professional gym floors and weight room areas. Rolled rubber is a great product for protecting floors from free weights and exercise equipment. Rubber flooring in rolls will act as a sound dampener and as a floor protector. Rolls of rubber flooring are a low cost resilient rubber flooring option.
Made in the USA from recycled rubber content.
Rubber rolls are relatively easy to install. Lay the rubber rolls directly over concrete, ceramic tile, or any smooth, hard, flat surface. For a wall to wall installation, simply unroll the rubber roll and cut the lengths to fit using a straightedge and a utility knife as needed. Rubber rolls are factory cut with precision so they will lay side-by-side with no gaps between rolls. The ends of the rolls are not cut square and will require trimming during installation.
For installation use double sided floor tape or adhesive to attach the rubber rolls to a clean, hard floor surface. When using a tape down method the rolls should be taped around the perimeter and at the seams. Rubber rolls can be dry laid in small installations under 400 SF.
General Rubber Flooring Roll Information:
Rubber flooring rolls are an economical rubber flooring option for home and professional flooring installations.
In stock rubber flooring rolls are available in pre-cut lengths of 25 and 50 linear feet in 1/4 inch, 8 mm and 3/8 inch thickness, in all black and common 10% color fleck.
Rubber flooring rolls are available in all black, black with 10 percent color fleck, black with 20 percent color fleck and custom runs up to 90 percent color fleck. Custom color runs are available. Reground rubber flooring rolls are an option at discounted pricing. Confetti color includes color flecks that vary from roll to roll. Reground material in general is the most affordable rolled rubber flooring option.
Rolls of rubber are available in thicknesses from 2 mm up to 1/2 inch thickness.
Rolled rubber is not a fatigue relief flooring product. It is hard like a car tire and will not provide cushion for aerobic activities. For those activities, please see our Aerobics Flooring category page.
Avoid getting this rolled rubber product wet. Although very non-porous, this rubber material will absorb water over time when submerged repeatedly or power washed on a regular basis. To dry this rubber material, it is best to elevate the material off the ground or hand-dry.
We have professional and knowledgeable sales staff ready to assist with questions, volume discount quotes and samples.
Find rubber rolls in all thickness and color options available at the best prices anywhere. We offer great shipping rates on rubber flooring rolls, we ship rubber flooring rolls from locations nationwide.
Thickness size tolerance plus or minus .02 inches
4 ft width size tolerance plus or minus 1/4 inch
Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In come cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified linear footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run.
Always use neutral Ph cleaner on rubber flooring. Damp mop with hot water.Shipping
Ships via freight delivery, shrink wrapped on pallets
This Product Ships Freight Only.
Please review our shipping disclaimer.
NOTE: This item is a custom order and is not returnable.
⌃ Back to topACCESSORIES FOR RUBBER FLOORING ROLL 8 MM 10% COLOR FLECK 4 X 25 FT
|SF per Item||100.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||9|
|Interlock Loss||0.00 feet|
|Material Hardness||Shore A 62|
|Surface Finish||Smooth flat|
|Surface Design||Color fleck|
|Installation Method||Dry lay, tape or glue down on hard flat surface|
|Border Strips Included||No|
|Manufacturer Warranty||5 year limited|
⌃ Back to top VIDEOS
⌃ Back to top Q & A