ForceFit Athletic Rolled Rubber 10% Color 8 mm x 4 Ft. Wide Per SF
Be the first to review this product
$2.35/sf
Save 20%
$2.35/sqft
Reg: $2.94/sf
Handling Time Estimate: 3-5 Working Days
- Safe and durable for many applications
- Slip resistant
- Sound absorption
- See More Details
- Safe and durable for many applications
- Slip resistant
- Sound absorption
- Anti fatigue comfort
- 10% color fleck
- Eco friendly
- Easy to clean
- Made in the USA
Schools, Commercial Gyms, Weight Rooms, Fitness Centers, Home Gyms, Fitness Centers
NOTE: This item is a custom order and is not returnable.
ForceFit Athletic Rolled Rubber 10% Color 8 mm x 4 Ft. Wide Per SF has specks to give your gym flooring a little color combined with the black base of rubber material. It is durable and a high-quality rubber flooring option for your gym floor.
ForceFit Athletic Rolled Rubber 10% Color 8 mm x 4 Ft. Wide Per SF is a resilient rubber flooring product that is a durable and long-lasting rubber fitness flooring. Made from recycled rubber material, this gym rubber flooring option is considered a green product and may contribute to LEED points in green buildings.
Rolled rubber flooring is a popular option in homes, schools, fitness centers, commercial gym floors, and weight room areas. Rolled rubber is a great product for protecting floors from free weights and exercise equipment. Rubber flooring rolls will act as a sound dampener and as a floor protector. Rolls of rubber flooring are a low-cost, resilient rubber flooring option.
Test Data:
Shore hardness: D-2240 – 65 +/- 5
Density: D-792 - 65 lbs./cu. ft.
Elongation (at break): D-412 – 100%
Tensile strength: D-412 – 250 psi
Taber abrasion: D-3884 – .047
Flame spread: E-84 – 135
Smoke density: E-84 – less than 450
Compression set: D-395 – 8.40%
Coefficient of Friction: D-1984-95 – Wet 1.20/Dry 1.20
VOC Emissions: D-5116 - .5 mg/m² or less
Static load limit: F970-00 - -0.001 inch
Electrostatic propensity: AATCC 134-1996 – Neg. 0.4 KV
Tear: D-624 – 70 PPI – Die C
Thickness tolerance: +/- .020
Width tolerance: +/- 1/4 inch
Made in the USA from recycled rubber content.Rolled rubber flooring is a popular option in homes, schools, fitness centers, commercial gym floors, and weight room areas. Rolled rubber is a great product for protecting floors from free weights and exercise equipment. Rubber flooring rolls will act as a sound dampener and as a floor protector. Rolls of rubber flooring are a low-cost, resilient rubber flooring option.
Test Data:
Shore hardness: D-2240 – 65 +/- 5
Density: D-792 - 65 lbs./cu. ft.
Elongation (at break): D-412 – 100%
Tensile strength: D-412 – 250 psi
Taber abrasion: D-3884 – .047
Flame spread: E-84 – 135
Smoke density: E-84 – less than 450
Compression set: D-395 – 8.40%
Coefficient of Friction: D-1984-95 – Wet 1.20/Dry 1.20
VOC Emissions: D-5116 - .5 mg/m² or less
Static load limit: F970-00 - -0.001 inch
Electrostatic propensity: AATCC 134-1996 – Neg. 0.4 KV
Tear: D-624 – 70 PPI – Die C
Thickness tolerance: +/- .020
Width tolerance: +/- 1/4 inch
Custom cuts will be about 1 inch over the requested length.
A one-component polyurethane-based adhesive is recommended for glue-down installations.
Rolls are ordered by the square foot, with a minimum order length of 15 ft.
Maintenance
For regular cleaning, damp mop with hot water and a neutral pH cleaner, such as Taski Profi.
Shipping
Ships via freight delivery, shrink-wrapped on pallets.
Please review our shipping disclaimer.
SKU# | ARC-8mm10C-SF |
In Stock | Yes |
Product Type | Roll |
Material Type | Rubber |
Product Edging | Straight |
Thickness | 8 mm |
Width | 4.00 feet |
Length | 1.00 feet |
SF per Item | 1.00 |
Weight | 1.85 lbs |
Packaging | Shrink Wrapped on Pallets |
Non Absorbent | Partial |
Special Adhesives | Yes |
Interlock Loss | 0.00 feet |
Material Hardness | D-2240 65+/-5 |
Interlocking Connections | No |
Made In | USA |
Surface Finish | Smooth |
Surface Design | Color fleck |
Installation Method | Dry lay, tape or glue down on hard flat surface |
UV Treated | No |
Reversible | Yes |
Border Strips Included | No |
Flammability | ASTM E-84 - 135 |
Smoke Density | ASTM E-84 - <450 |
Static Test | ASTM F970-00 - -.001in. |
Manufacturer Warranty | 1 year limited |