Joint Adhesive 30 oz Tube
$62.48/each
Save 14%
Reg: $73.50/each
Handling Time Estimate: 1-3 Working Days
- Convenient 30-ounce tube
- Made in the USA
- Water resistant when cured
- See More Details
Please Call for Sample Options
- Convenient 30-ounce tube
- Made in the USA
- Water resistant when cured
- Latex based, non-flammable formula
- Use with Blue Sky Rubber Tiles
Blue Sky outdoor rubber tiles
NOTE: This item is a custom order and is not returnable.
Use this rubber flooring adhesive with Blue Sky rubber tiles and accessories.
Our mastic Joint Adhesive for Blue Sky rubber outdoor tiles is available in a convenient 30-ounce tube. This is a polyurethane-based joint sealant. It cures under the influence of atmospheric moisture to form an elastomeric material with adhesive properties, in some cases, without the need for priming of the substrate.
This formula features strong, early, wet strength to resist slippage on vertical surfaces and is water resistant once fully cured.
Coverage
Our mastic Joint Adhesive for Blue Sky rubber outdoor tiles is available in a convenient 30-ounce tube. This is a polyurethane-based joint sealant. It cures under the influence of atmospheric moisture to form an elastomeric material with adhesive properties, in some cases, without the need for priming of the substrate.
This formula features strong, early, wet strength to resist slippage on vertical surfaces and is water resistant once fully cured.
Tile to tile - 20 tiles per tube
Tile to floor - 16 tiles per tube
Shipping
Please review our shipping disclaimer.
| In Stock | Yes |
| Thickness | Less than 2 mm |
| Width | 0.00 feet |
| Length | 0.00 feet |
| SF per Item | 0.00 |
| Weight | 2.00 lbs |
| Packaging | Cartons |
| Non Absorbent | Yes |
| Special Adhesives | Yes |
| Interlock Loss | 0.00 feet |
| Interlocking Connections | No |
| Made In | USA |
| Installation Method | Glue down |
| UV Treated | Yes |
| Reversible | No |
| Border Strips Included | No |
Product Questions:
Q: How much of this per sf? Do you glue these tiles to the ground or just to each other?
A: The manufacturer recommends that each tube can over 10 tiles for the glue down installation, and when used between the tiles, each tube will cover 20 tiles. The tiles should be glued to each other and then the tiles around the 2 perimeter courses should be glued to the ground.
1 star ratings
5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
Customer Rating: 
10/19/2017
Very good adhesive for the blue sky tiles. Also used for other purposes and was well pleased with adhesive characteristics.
Erik
Dothan, AL
RELATED PRODUCTS
