Airug Anti-Fatigue Mat 5/8 Inch x 3x5 Ft.
(1 Answered Questions)
Be the first to review this product
$83.57/mat
Save 20%
$5.57/sqft
Reg: $105.71/mat
Handling Time Estimate: 2-3 Weeks
- Wear resistant
- Basic Anti-fatigue mat
- Ergonomic safety mat
- See More Details
- Wear resistant
- Basic Anti-fatigue mat
- Ergonomic safety mat
- Beveled edges
- Slip resistant
- Standing Mat
- Free of DOP, DMF
- Tear resistant
Manufacturing plants, Assembly lines, Picking, Packing and Logistics warehouses, Individual work stations
NOTE: This item is a custom order and is not returnable.
Airug Anti-Fatigue Mat 5/8 Inch x 3x5 Ft. relieves leg and back discomfort with millions of air bubbles that help with slip resistance.
Airug Anti-Fatigue Mat 5/8 Inch x 3x5 Ft. has a ribbed top surface, the mat consists of air bubbles that improves the mats slip resistance while offering increased essential worker fatigue relief. The PVC closed cell foam construction help to alleviate leg and back distress and provides a barrier to cold floors. Airug Anti Fatigue Mat use in conditions where light duty anti-fatigue relief is needed at a low cost.
Width: 3 ft
Length: 5 ft
Thickness: 5/8 inch
Sq ft: 15
Weight: 13.95 lbs
Abrasion resistant – ATSM D3884-01
Static Coefficient of friction – ASTM C-1028-96
Tear resistant – ASTM D-1004-94a-03 (measured in lbs.)
Elongation/Tensile – ASTM D412
Use of product in environments specified as “Useable, not recommended” or “Not recommended” will void warranty. Ratings are intended to be used as a guide only. Actual results may vary depending on concentration of chemicals.
Recommended:
Width: 3 ft
Length: 5 ft
Thickness: 5/8 inch
Sq ft: 15
Weight: 13.95 lbs
Abrasion resistant – ATSM D3884-01
Static Coefficient of friction – ASTM C-1028-96
Tear resistant – ASTM D-1004-94a-03 (measured in lbs.)
Elongation/Tensile – ASTM D412
Chemical Resistance
Use of product in environments specified as “Useable, not recommended” or “Not recommended” will void warranty. Ratings are intended to be used as a guide only. Actual results may vary depending on concentration of chemicals.
Ammonium Hydroxide (30%), Benzoic Acid, Boric Acid, Butter, Butyl Alcohol (butanol), Carbon Monoxide, Corn Oil, Cottonseed Oil, Cyclohexanol, Ethane, Ethylene glycol (antifreeze), Formaldehyde (37%), Formic Acid, Glucose, Glycerin, Hydrazine, Hydrogen Peroxide, Iodine, Methyl Alcohol (Methanol), Methyl Methacrylate, Peanut Oil, Phosphoric Acid, Potassium Hydroxide (50%), Propane, Silicates, Silver Nitrate, Sodium Bicarbonate, Sodium Hydroxide (0.34%), Sodium Hypochlorite (Bleach), Sulfuric Acid (<10%), Sulfuric Acid (10-75%), Vegetable Oil, Vinegar (5% Acetic Acid)
Suitable for Use:
2-Propanol (Isopropyl Alcohol), Acetic Acid (50%), Beef Fat, Bromine, Calcium Chloride, Calcium Hydroxide, Chicken Fat, Citric Acid (10%), Fuel Oil, Gear Oil (85w-140), Heptane, Hydraulic Fluid, Hydrochloric Acid (30%), Linseed Oil, Methane, Motor Oil (10w-30 natural and synthetic), Naptha, Nitric Acid (20%), Nitric Acid (Concentrated), Octane, Oxalic Acid, Pentane, Petroleum, Power Steering Fluid, Propyl Alcohol (Propanol), Sodium Hydroxide, Stearic Acid, Transmission Fluid
Useable, not-recommended:
Acetaldehyde (50%), Acetone, Amyl Acetate, Butane, Butyl Acetate, Chromic Acid (50%), Dibutyl Phthalat, Diesel Fuel, Diesel Oil, Dibutyl Phthalate, Ethyl Acetate, Ethyl Alcohol (Ethanol), Ethyl Ether, Gasoline, Hexane, Hydrofluoric Acid (30%), Jet Fuel, Kerosene, Methyl Formate, Mineral Oil, Mineral Spirits, Oleic Acid, Perchloroethylene, Pine Oil (20%=Pine-Sol)
Not recommended:
Acetic Acid (Glacial), Acetic Anhydride, Aniline, Benzene, Benzyl Alcohol, Brake Fluid, Carbolic Acid (Liquid Phenol), Carbon Tetrachloride, Chloroacetone, Chloroform, Cyclohexane, Cyclohexanone, Dioctyl Phthalate (DOP), Lacquers, Methyl Ethyl Ketone (MEK), Methyl Isobutyl Ketone (MIBK), Methylene Chloride, Nitrobenzene, Pine Oil (100%), Propylene Dichloride, Styrene, Sulfuric Acid (Concentrated), Tetrahydrofuran (THF), Toluene (Methyl Benzene), Trinitrobenzene, Turpentine, Xylene
Airug Anti-Fatigue Mat is a registered trademark of NoTrax
Maintenance
Sweep regularly or dry mop the surface and the back of the mat. The surface can be damp-mopped with a mild soap/detergent.
Shipping
Ships ground delivery, larger orders on pallets via freight delivery.
Please review our shipping disclaimer.
| SKU# | 410S0535 |
| In Stock | Yes |
| Product Type | Mat |
| Material Type | PVC/Foam |
| Product Edging | Straight |
| Thickness | 5/8 inch |
| Width | 3.00 feet |
| Length | 5.00 feet |
| SF per Item | 15.00 |
| Weight | 13.95 lbs |
| Packaging | Cartons |
| Non Absorbent | No |
| Special Adhesives | No |
| Interlock Loss | 0.00 feet |
| Interlocking Connections | No |
| Made In | USA |
| Surface Finish | Ribbed |
| Surface Design | Solid color |
| Installation Method | Lay flat |
| UV Treated | No |
| Reversible | No |
| Border Strips Included | No |
| Manufacturer Warranty | 1 year limited manufacturer |
View Specifications Data Sheet RECENTLY VIEWED
RELATED PRODUCTS
