Trade Show Flooring

This yields the best trade show carpet surface for trade show booths that need to accommodate rolling loads with a firm, yet comfortable low pile carpet top and sturdy plastic base.

Installation

Each carton contains both vertical and horizontal orientations. The carton has half of each type of orientation. Install them in alternating orientations to yield a checkerboard pattern. These are common types of installations with modular carpet tiles, as the lay of the grain varies across the manufacturing run.

Rather than laying them with the orientation matching throughout the room, which would result in these variations in grains becoming more noticeable, alternating delivers the most desirable looks in the patterns.
Each contains a loop and tab type of design. They will stay together tightly after connecting them. Additionally, the layout goes quickly. If disassembly is required, it goes fast too, which gives these models a lot of versatility for usage cases.

For your first time installing the 10x10 trade show booth floor, allow 35 minutes to install the tiles themselves and another 15 minutes for border strip installation on all four sides. This time estimate is based on a lone novice installer. Having a second person helping can drastically reduce the installation time - as will experience installing the floor. For disassembly and reboxing of the carpet tile exhibition floor, allow 20 minutes for the first time.

Individual tiles have female loops on two sides and tabs on the opposite sides. This layout makes the snap together edges installable with minimal effort.

To follow the proper steps in connecting them properly, start in a corner of the area with the loops pointing in the direction the next parts will go. Then lay the tab over the loop portion of the adjacent one in perfect alignment and gently step on the seam between them to connect them.

Carpet Squares for Portable Durability

Here are ideas for making use of carpet square parts indoors in a portable usage case.

1. Events: For a warehouse setting or another building that contains cold, hard floors, our models are appropriate for delivering a warmer atmosphere for the event. Just lay them out where groups will be gathering to create something that looks great and will be impressive to visitors. Put tables and chairs on top of them, and these Made in America products will hold up to the weight.

2. Creates Walkways: For events like graduation and awards ceremonies, make a special walkway that will draw attention to the people being honored. Use a pattern for the walkway that everyone can follow toward a stage. Not only does this walkway look great, but it could be safer to walk on than a slick surface.

Once the special use is completed, disassemble them and place them in storage until the next time they’re needed.

Maintenance

Vacuum as needed.

Shipping

Ships in cartons via ground service, larger orders may ship via freight delivery.

This Product Ships UPS Ground, FedEx Ground and/or Freight.
Please review our shipping disclaimer.

SKU#	CCT1/2-10x10
In Stock	Yes
Product Type	Tile
Material Type	Carpet on Plastic
Product Edging	Interlocking
Thickness	3/4 inch
Width	10.10 feet
Length	10.10 feet
SF per Item	102.01
Weight	92.50 lbs
Packaging	Cartons
Non Absorbent	Yes
Special Adhesives	No
Universal Interlock	No
Interlock Loss	0.00 feet
Interlocking Connections	Yes
Made In	USA
Surface Finish	Carpet top
Surface Design	Solid color
Installation Method	Click together tiles
UV Treated	No
Reversible	No
Border Strips Included	Yes
Manufacturer Warranty	1 Year limited