Vinyl Peel & Stick Maple Plank Floor Tile 12x12 inch

1. Easy installion with peel and stick backing
2. Very resistant to moisture
3. Will not expand like laminate due to moisture
4. Cost effective commercial grade vinyl flooring solution
5. No adhesive required
6. Install anywhere on any hard flat surface
7. Wear resistant surface
8. Available in a variety of design finishes

Peel and Stick Vinyl Tile With Maple Plank Wood Finish

Maple is a highly popular material for use in natural hardwood flooring. However, it’s pricey and challenging to maintain. For a less expensive and easy-to-install option that resembles natural maple, try our Maple Plank Floor Peel and Stick Vinyl Tile.

By selecting luxury vinyl tile for the installation, home owners will receive a reasonably priced flooring that looks like the real thing.

The printed layer on the top of the vinyl squares uses a wood grain finish and slightly varying color tones to give it a resemblance to actual hardwood installations.

Ease of Installation With Vinyl Squares

When the installer selects our peel and stick vinyl tile product, the installation will go quickly without the need to hire a professional. Each square measures only 1-by-1-foot, which makes the individual pieces of these maple vinyl squares easy to handle and to move into place.

These squares have a pre-applied adhesive layer on the back of the vinyl that the manufacturer adds at the factory. This eliminates the need for the installer to use messy glue on the subfloor before laying out the vinyl squares, which simplifies the install process.

The self-adhesive squares will go over the top of almost any kind of firm subflooring, providing a high level of versatility. Lay them out over the top of concrete, existing laminate, or plywood subfloors.

There’s no need to add an underlayment over the subfloor before applying these squares. In fact, installers typically do not need to perform any major prep work to the subfloor before laying out the peel and stick vinyl tile squares.

Just sweep the subfloor to remove dry debris that could interfere with the adhesion.

If the self-stick vinyl tiles ship with special instructions for preparing the subfloor prior to installation, be sure to follow those instructions.

Start the installation process in one corner of the room. Each vinyl square is straight on all four sides, which makes the layout process far easier. Installers simply need to line up the edge of the new tile next to the edge of the previously installed tile. Place them tightly next to each other.

Do not remove the protective layer from the back until it’s time to adhere the tile to the subfloor. The adhesive layer is extremely sticky, and leaving the protective layer in place makes it easier to move the tile around before adhering it to the subfloor.

During the install process, installers may need to cut tiles to fit tightly against a wall or around obstacles like built-in cabinets or support posts. At only 3 mm in thickness, it’s easy to cut these tiles with scissors or a sharp utility knife.

Leave the backing in place while cutting the squares to make the process easier.

Benefits of Peel and Stick Vinyl Tile

Our tiles offer a few different benefits for customers, including the following.

Low Price
At only a couple dollars per square foot of coverage, this is a budget-friendly style of flooring. Additionally, because there’s no need to hire a professional for the installation, customers save even more money versus a complex type of flooring.

Versatility
These vinyl squares will work in almost any area of a residential or commercial building. Because they are water- and moisture-resistant, they even will work in rooms where moisture may exist, including:

• Kitchen
  
• Bathroom
  
• Entryway
  
• Basement
  
• Laundry room

Realistic Design

The light brown tones found in our vinyl tiles will enhance the feeling that visitors are looking at an actual maple hardwood floor. With multiple color tones mixed together in the printed layer, the tile has a greater resemblance to real hardwoods.

The manufacturer adds a wood grain pattern in the printed layer of the vinyl too. The variable wood grains in the tiles yield a random looking layout, which is part of the charm of an actual hardwood floor.

Installers will want to position each of the individual tiles to ensure the wood grain on the printed layer is aligned in the same direction to maintain the feel of a real wood floor.

Maple Plank Floor Finish LVT Specifications

• Dimensions: 12 by 12 inches
  
• Thickness: 3 mm (about 0.12 inches)
  
• Material: Vinyl
  
• Coverage per carton: 36 square feet
  
• Pieces per carton: 36
  
• Surface finish: Smooth

Maintenance and Care

To maintain this peel and stick vinyl tile floor, simply sweep it with a broom or use a dust mop as needed.

As this is a water-resistant type of flooring, making use of a damp mop is a good way to remove stubborn soils or for a weekly cleaning process. Those cleaning the floor can make use of any common household flooring product while mopping.

No regular maintenance needs to occur with this vinyl floor. This differs from a natural hardwood flooring, which requires regular processes like refinishing every few years.

Unlike cheap laminate products, our vinyl squares do not absorb moisture. The vinyl will not expand when exposed to water. Our product includes a 5-year limited manufacturer’s warranty. Maintenance

Damp mop as need with common household floor cleaner.

Shipping

Ships ground service to your door or freight delivery shrink wrapped on pallets for larger orders.

This Product Ships Freight Only.
Please review our shipping disclaimer.

Ask a question

Product Questions: