Outdoor Field Wall Padding for Chain Link Fences with Graphics 7x4 ft
- Made in the USA
- Moisture resistant, matching backer board
- 18 oz. customized vinyl covers add team spirit
- See More Details
Ships
Out: Estimate 4-6 Weeks
3x4 ft
$32.93/sqft
2x4 ft
$36.10/sqft
4x4 ft
$29.93/sqft
5x4 ft
$30.02/sqft
6x4 ft
$27.23/sqft
7x4 ft
$27.41/sqft
8x4 ft
$26.36/sqft
-
Black -
Burgundy -
Cobalt -
Dark Green -
Dusky Blue -
Emerald -
Grey -
Red -
Royal Blue -
Spruce -
Sunflower
Contact customer service for a quote. Free design assistance.
TOP FEATURES
- Made in the USA
- Moisture resistant, matching backer board
- 18 oz. customized vinyl covers add team spirit
- Large selection of color choices
- Bolt and plate attachment method
- 3 inch thick high impact polyurethane foam
- Class A flame retardant
- Z-Clip installation options available
Use Types
Fences and gates, Ball fields, Outdoor track arenas
NOTE: This item is a custom order and is not returnable.
Bolt on Outdoor Field Wall Padding for Chain Link Fences with Graphics 7 ft high x 4 ft wide provides customized safety and quality for athletes playing outdoor sports like football, softball, and baseball.
When you want field wall pads that look as good as they perform, the Outdoor Field Wall Padding for Chain Link Fences with Graphics 7x4 Ft product delivers the exact results you're seeking.
This outdoor sports graphic wall pad product is available in several different colors. You then can add personalized graphics, logos, and lettering to the 7x4 outdoor arena wall padding to provide a customized look that will impress your fans and athletes.
Easy to Install
This outdoor sports graphic wall pad product is available in several different colors. You then can add personalized graphics, logos, and lettering to the 7x4 outdoor arena wall padding to provide a customized look that will impress your fans and athletes.
Easy to Install
Even though each of these field wall pads weighs 71.75 pounds, most stadium management crews can perform the installation themselves. Installation instructions are provided to ensure the pads are mounted correctly.
When installing the outdoor sports graphic wall pad on a chain link fence, such as you might find around a baseball or softball diamond, you can use bolt and plate attachment brackets to mount the pieces of softball outfield fence padding.
If you're performing the installation of these field wall pads at an older stadium, such as might be used for football or soccer, you may encounter cement or wooden fences that need padding to give athletes a measure of safety. You can use our Outdoor Field Wall Padding Z-Clip products to attach the 7x4 outdoor arena wall padding to this style of wall.
High Quality Materials
With UV protection and moisture protection built into the softball outfield fence padding, you'll receive a high level of longevity in this product. The woven fence pad will maintain its quality and includes a five (5) year limited fade warranty.
The outer layer in the 7x4 chain link fence logo wall pad product is an 18-ounce high UV resistant extruded vinyl. It is securely fastened to a 5/8 inch thick engineered moisture resistant sheathing panel made from plywood. This plywood layer gives the field wall pads a level of rigidity and support that is needed to ensure the 7x4 outdoor arena wall padding doesn't sag over time.
Additionally, we paint any exposed areas of the plywood layer to match the color on the vinyl, ensuring a finished look.
The middle layer is a 3-inch thick high impact polyurethane foam that gives the outdoor sports graphic wall pad its cushioning properties.
Easy Ordering
Please contact our customer service team when you're ready to order the Outdoor Field Wall Padding for Chain Link Fences with Graphics 7x4 Ft product. We can answer any questions you may have about design options, other sizes, or installation.
This is a time-tested and proven field wall pads product that provides facilities with an affordable safety solution. This 7x4 outdoor arena wall padding is in use in hundreds of venues around the world, making it the industry leader. Customers love the look of our outdoor sports graphic wall pad, as they can add team spirit to any venue, while also delivering a high level of safety for athletes!
Product components:
Backing: 5/8 inch APA BC exterior grade plywood, primed on edges and backside. Exposed plywood surface is painted to match vinyl color.
Vinyl covering:
- 18 oz per sq. yard laminated vinyl, unbalanced coating
- Fabric: 1000 Denier polyester basic fabric
- Tear strength test: warp 85 lbs., fill 83 lbs.
- Tensile strength: warp 221 lbs., fill 216 lbs.
- Weft insertion: 9 x 9
- Superior UV inhibitors
- Cold crack: minus 20 degrees Fahrenheit
- Class A flame retardant
- Vinyl cover is wrapped around the backside of the plywood and stapled every 3 inches with stainless steel staples.
- Each pad has 3 weep holes to evacuate moisture
Filler Foam: 3 inch high impact foam. Filler foam is glued to plywood backing
Adhesive: Synthetic resin rubber base adhesive, high flexibility factor, water resistant, heat & cold resistant, high bonding factor
Attachment: Attached by a minimum of 6 1/4 x 1-1/2 inch stainless steel bolts screwed into 1/4 inch threaded stainless steel washer inserts with 1/8 x 3 inch round backing plates
When installing the outdoor sports graphic wall pad on a chain link fence, such as you might find around a baseball or softball diamond, you can use bolt and plate attachment brackets to mount the pieces of softball outfield fence padding.
If you're performing the installation of these field wall pads at an older stadium, such as might be used for football or soccer, you may encounter cement or wooden fences that need padding to give athletes a measure of safety. You can use our Outdoor Field Wall Padding Z-Clip products to attach the 7x4 outdoor arena wall padding to this style of wall.
High Quality Materials
With UV protection and moisture protection built into the softball outfield fence padding, you'll receive a high level of longevity in this product. The woven fence pad will maintain its quality and includes a five (5) year limited fade warranty.
The outer layer in the 7x4 chain link fence logo wall pad product is an 18-ounce high UV resistant extruded vinyl. It is securely fastened to a 5/8 inch thick engineered moisture resistant sheathing panel made from plywood. This plywood layer gives the field wall pads a level of rigidity and support that is needed to ensure the 7x4 outdoor arena wall padding doesn't sag over time.
Additionally, we paint any exposed areas of the plywood layer to match the color on the vinyl, ensuring a finished look.
The middle layer is a 3-inch thick high impact polyurethane foam that gives the outdoor sports graphic wall pad its cushioning properties.
Easy Ordering
Please contact our customer service team when you're ready to order the Outdoor Field Wall Padding for Chain Link Fences with Graphics 7x4 Ft product. We can answer any questions you may have about design options, other sizes, or installation.
This is a time-tested and proven field wall pads product that provides facilities with an affordable safety solution. This 7x4 outdoor arena wall padding is in use in hundreds of venues around the world, making it the industry leader. Customers love the look of our outdoor sports graphic wall pad, as they can add team spirit to any venue, while also delivering a high level of safety for athletes!
Product components:
Backing: 5/8 inch APA BC exterior grade plywood, primed on edges and backside. Exposed plywood surface is painted to match vinyl color.
Vinyl covering:
- 18 oz per sq. yard laminated vinyl, unbalanced coating
- Fabric: 1000 Denier polyester basic fabric
- Tear strength test: warp 85 lbs., fill 83 lbs.
- Tensile strength: warp 221 lbs., fill 216 lbs.
- Weft insertion: 9 x 9
- Superior UV inhibitors
- Cold crack: minus 20 degrees Fahrenheit
- Class A flame retardant
- Vinyl cover is wrapped around the backside of the plywood and stapled every 3 inches with stainless steel staples.
- Each pad has 3 weep holes to evacuate moisture
Filler Foam: 3 inch high impact foam. Filler foam is glued to plywood backing
Adhesive: Synthetic resin rubber base adhesive, high flexibility factor, water resistant, heat & cold resistant, high bonding factor
Attachment: Attached by a minimum of 6 1/4 x 1-1/2 inch stainless steel bolts screwed into 1/4 inch threaded stainless steel washer inserts with 1/8 x 3 inch round backing plates
Maintenance
Wipe down as needed.
Shipping
Ships via freight delivery shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
ANSWERS
SPECIFICATIONS
| SKU# | BFWPCL47DG |
| In Stock | Yes |
| Product Type | Mat |
| Material Type | Vinyl covered Foam |
| Product Edging | Straight |
| Thickness | 3-3/4 inch |
| Width | 4.00 feet |
| Length | 7.00 feet |
| SF per Item | 28.00 |
| Weight | 71.75 lbs |
| Packaging | Shrink Wrapped on Pallets |
| Number of Pieces per Package Type | 18 |
| Non Absorbent | Yes |
| Special Adhesives | No |
| Interlock Loss | 0.00 feet |
| Interlocking Connections | No |
| Made In | USA |
| Surface Finish | Smooth flat |
| Surface Design | Solid color |
| Installation Method | Bolt and plate |
| UV Treated | Yes |
| Reversible | No |
| Border Strips Included | No |
| Manufacturer Warranty | 1 year limited |
