ForceFit West Athletic Rolled Rubber Regrind 8 mm x 4 Ft. Wide Per SF
Be the first to review this product
$1.48/sf
Save 20%
$1.48/sqft
Reg: $1.85/sf
Handling Time Estimate: 3-5 Working Days
- Impact absorption
- Slip resistant
- This product ships from Arizona
- See More Details
Colors:
Roll Calculator
Note: Material Width for this Product is 4' wide
Rolls are cut to 15 ft minimum
Option 1
Option 2
Custom Roll Length
- Impact absorption
- Slip resistant
- This product ships from Arizona
- Durable in high traffic areas
- Rubber rolls for gyms
- Low VOC emission .5 mg/m2 or less
- Comfortable and anti fatigue
- Made in the USA
Schools, Commercial Gyms, Weight Rooms, Fitness Centers, Home Gym
NOTE: This item is a custom order and is not returnable.
Rolled Rubber Regrind
ForceFit West Athletic Rolled Rubber Regrind 8 mm x 4 Ft. Wide Per SF is a resilient regrind rubber flooring product designed to be strong and long-lasting. Made from recycled rubber, it is a regrind of material with varying colors and color percentages that may vary from lot to lot. This gym rubber flooring option is considered a green product and may contribute to LEED points in green buildings.
8 mm rubber flooring rolls are a popular option in homes, schools, and professional gyms. This rolled rubber, which has a base color of black and color flecks mixed throughout, is a great product for protecting floors from free weights and exercise equipment. Rubber flooring rolls will act as a sound dampener and as a floor protector. Rolls of rubber flooring are a low-cost resilient rubber flooring option.
Test Data:
Shore hardness: D-2240 – 65 +/-5
Density: D-792 - 65 lbs./cu. ft.
Elongation (at break): D-412 – 100%
Tensile strength: D-412 – 250 psi
Taber abrasion: D-3884 – .047
Flame spread: E-84 – 135
Smoke density: E-84 – less than 450
Compression set; D-395 – 8.40%
Coefficient of Friction: D-1984-95 – Wet 1.20/Dry 1.20
VOC Emissions: D-5116 - .5 mg/m2 or less
Static load limit: F970-00 - -0.001Inch
Electrostatic propensity: AATCC 134-1996 – Neg. 0.4 KV
Tear: D-624 – 70 PPI – Die C
Thickness tolerance: +/- .020
Width tolerance: +/- 1/4 inch
This product ships from Arizona.
Custom cuts will be about 1 Inch over the requested length.
A one-component polyurethane-based adhesive is recommended for glue-down installations.
Rolls are ordered by the square foot, with a minimum order length of 15 LF.
Disclaimer
Regrind provides an economical option to obtain some color in the rubber flooring. Colors and color percentages are inconsistent and will vary from roll to roll and from lot to lot. No guarantee of which color or the amount of color will be present in the rubber flooring material when it is made.
Maintenance
For regular cleaning damp mop with hot water and a neutral Ph cleaner, such as Taski Profi.
Shipping
Ships via freight delivery, shrink wrapped on pallets.
Please review our shipping disclaimer.
| SKU# | ARC-8mmRgd-SF-AZW |
| In Stock | Yes |
| Product Type | Roll |
| Material Type | Rubber |
| Product Edging | Straight |
| Thickness | 8 mm |
| Width | 4.00 feet |
| Length | 1.00 feet |
| SF per Item | 1.00 |
| Weight | 1.85 lbs |
| Packaging | Shrink Wrapped on Pallets |
| Non Absorbent | Partial |
| Special Adhesives | Yes |
| Interlock Loss | 0.00 feet |
| Material Hardness | D-2240 65+/-5 |
| Interlocking Connections | No |
| Made In | United States |
| Surface Finish | Smooth |
| Surface Design | Color fleck |
| Installation Method | Dry lay, tape, or glue down on hard, flat surface |
| UV Treated | No |
| Reversible | Yes |
| Border Strips Included | No |
| LEED Points | Yes |
| Manufacturer Warranty | 1 year limited manufacturer |
View Installation InstructionsRELATED PRODUCTS
(2)
