Outdoor Field Wall Padding for Chain Link Fences 7 ft x 4 ft
GREATMATS CUSTOMERS ALSO VIEWED
Gym Wall Pads All Sizes
Outdoor Field Wall Padding with Z Clip 2 ft x 4 ft
Pole Pads and Post Padding All
Gym Wall Padding All Sizes
Outdoor Field Wall Padding with Grommets 6 ft x 4 ft
Tac-Mat Contamination Control Dry Mat 18 x 36 inches
Statfree B2 Roll 0.060 Inch, 30 Inch x 50 Ft Dark Blue Desco
Wall Pad 2x6 ft 2 Inch ASTM Foam WB Lip TB
- Made in the USA
- Moisture resistant, matching backer board
- 18 oz. vinyl covers
- Large selection of color choices
- Bolt and plate attachment method
- 3 inch thick high impact polyurethane foam
- Class A flame retardant
- Graphics and Z-Clip installation options available
Fences and gates, Ball fields, Outdoor track arenas
Bolt on Outdoor Field Wall Padding for Chain Link Fences 7 ft x 4 ft provides customized safety and quality for athletes playing outdoor sports like football, softball, and baseball.
Outdoor Field Wall Padding for Chain Link Fences 7 ft high x 4 ft wide from Greatmats is manufactured with 18 oz. high UV resistant extruded vinyl, 3 inch thick high impact polyurethane foam padding and a 5/8 inch thick engineered moisture resistant sheathing panel. It is a time-tested, proven product that provides facilities with an affordable safety solution. Outdoor Field Wall Padding for Chain Link Fences from Greatmats is installed on chain link fences with bolt and plate attachment brackets. For installation on concrete or wood walls, please see our Outdoor Field Wall Padding Z-Clip products.
Our manufacturer has installed padding in hundreds of venues around the world and is the industry leader, offering site specific safety with customizing capabilities. Outdoor Field Wall Padding for Chain Link Fences in available in a variety of sizes and colors, for a custom design. In addition, optional custom digital graphics and/or lettering is available with our Outdoor Field Wall Padding for Chain Link Fences with Graphics products.
Backing: 5/8 inch APA BC exterior grade plywood, primed on edges and backside. Exposed plywood surface is painted to match vinyl color.
- 18 oz per sq. yard laminated vinyl, unbalanced coating
- Fabric: 1000 Denier polyester basic fabric
- Tear strength test: warp 85 lbs., fill 83 lbs.
- Tensile strength: warp 221 lbs., fill 216 lbs.
- Weft insertion: 9 x 9
- Superior UV inhibitors
- Cold crack: minus 20 degrees Fahrenheit
- Class A flame retardant
- Vinyl cover is wrapped around the backside of the plywood and stapled every 3 inches with stainless steel staples.
- Each pad has 3 weep holes to evacuate moisture
Filler Foam: 3 inch high impact foam. Filler foam is glued to plywood backing
Adhesive: Synthetic resin rubber base adhesive, high flexibility factor, water resistant, heat & cold resistant, high bonding factor
Attachment: Attached by a minimum of 6 1/4 x 1-1/2 inch stainless steel bolts screwed into 1/4 inch threaded stainless steel washer inserts with 1/8 x 3 inch round backing plates
Wipe down as needed.Shipping
Ships via freight delivery shrink wrapped on pallets.
This Product Ships Freight Only.
Please review our shipping disclaimer.
NOTE: This item is a custom order and is not returnable.
SPECIFICATIONS⌃ Back to top
|Material Type||Vinyl covered Foam|
|SF per Item||28.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||18|
|Interlock Loss||0.00 feet|
|Surface Finish||Smooth flat|
|Surface Design||Solid color|
|Installation Method||Bolt and plate|
|Border Strips Included||No|
|Manufacturer Warranty||1 year limited|
Q & A⌃ Back to top