Non-Slip LonWood Marine Collection Commercial Vinyl Floor Rolls 6x60Ft

Top Features for LonWood Marine Collection Commercial Vinyl Rolls 6x60 Ft

1. International Maritime Organization Compliant
2. Natural Wood Grain Look
3. High Performance, Saftey Flooring, Slip Resistant
4. Factory Applied Urethene Finish for Low Maintenance
5. Coordinating Trim for Hatch Covers and Access Panels
6. Waterproof Seams and Baseboard Coving
7. Durable Wear-Layer that Provides Years of Marine Usage

LonWood Commercial Marine Vinyl Roll, 6x60 Feet

To maintain the luxury look and feel of a yacht or a similar watercraft, make use of our LonWood Commercial Marine Vinyl Roll of flooring. This wood look vinyl floor will give the boat a high-end appearance, maintaining the value and impressing visitors or potential buyers.

The manufacturer developed this flooring for indoor spaces on the boat. This is a resilient type of flooring that’s perfect for use in marine environments. Boats can encounter constant dampness and tracked-in water, which can be extremely hard on flooring.

But our marine vinyl roll will hold up against all of these conditions without showing unwanted wear and tear. It meets marine-use standard IMO/MED 96/98/EC. It is an outstanding choice where boat owners want a versatile type of flooring that looks amazing and will last a long time.

Multiple Installation Options

Installers can place our marine vinyl roll in any weather-protected location on a boat or yacht, including inside the galley, in the deck ways, or in a living space.

It ships with baseboard coverings that match the teak and holly design of the floor, finishing off the high-end look that you are trying to achieve. With the coordinating trim pieces, installers can use this material for hatch covers and access panels on the boat as well.

Like other high-quality vinyl floors, this model of Lonseal flooring will continue to maintain its integrity when used in a high-traffic area. Boats often have limited space for walkways, meaning all of the passengers are traveling over the same spot repeatedly.

Even so, our vinyl flooring does not show significant wear and tear in areas where people are frequently walking, especially when boat owners follow the maintenance and cleaning requirements for the material.

When laying out this marine vinyl roll over a big or small area, installers will need to glue the flooring to the subfloor with an approved adhesive. Match the adhesive to the subfloor material for the best results.

Should the installer need to lay multiple vinyl sheets side by side, creating a seam in the layout, the manufacturer requires that a professional performs a heat welding process on the seam. This yields the sturdiest possible layout and eliminates the possibility of the edges curling.

Because of the urethane protective layer applied at the factory, this style of flooring cannot take a chemical weld on the seams. Installers should not remove the glossy urethane finish layer at any time, as this process could damage the floor.

If the installer needs to cut the vinyl to fit a certain space or to go around stationary objects, this takes very little time. The floor measures only 2 mm, or about 79 mil, in thickness. A sturdy utility knife can penetrate the thin floor, usually with a single cut.

Non Slip Safety Flooring

In a damp marine environment, it is important to install a type of flooring with anti slip properties. This roll of vinyl is naturally slip resistant, giving visitors a safe way to walk around the boat, even if they have wet shoes.

Customers should remove puddles of water as soon as they appear to provide a further layer of safety. Although the floor will maintain its non slip properties in puddles of water, the safest option is to clean up spills and puddles when you notice them.

Teak & Holly Sheet Vinyl Roll Specifications

• Width: 6 feet
  
• Length: 60 feet
  
• Thickness: 2 mm (about 0.079 inches)
  
• Wear layer: 0.5 mm (about 0.02 inches)
  
• Coverage: 360 square feet
  
• Weight per roll: 235 pounds
  
• Weight per linear foot: 3.92 pounds
  
• Wood stain colors: Glossy Teak and Holly
  
• Texture: Smooth

Maintenance and Care

Because the manufacturer applies a urethane finish coating at the factory, our marine vinyl roll does not require as much maintenance as some other vinyl flooring options made for use in marine environments.

By creating a low maintenance type of boat flooring, customers can spend more time enjoying their time on the water and less time performing cleaning and maintenance tasks. This roll carries a 5-year limited manufacturer warranty, and customers can receive a greater lifespan by maintaining the floor properly.

For dry debris and dust, customers can use a broom, a vacuum cleaner, or a dry mop to clean the floor. Some customers will choose to use a garden hose with a power nozzle to wash the floors when they’re in use in an area with a drain.

If the floor has stuck-on solids, customers can remove them by scraping them with a putty knife. Use care when deploying the putty knife, as it could gouge the floor if you use too much force.

For a more thorough cleaning of stains and solids, use of a mop or a gentle scrubbing machine is allowable. Use a neutral pH cleaning solution diluted with warm water to clean the floor properly.

The floor should dry naturally in the air after washing it.

Maintenance

Mop with a neutral pH cleaner.

Shipping

Ships via freight delivery

This Product Ships Freight Only.
Please review ourshipping disclaimer.

Ask a question

Product Questions:

PDF Documents:

• View Installation Instructions
• View Cleaning and Maintenance
• View Specifications Data Sheet
• View Wood Grain Installation Guide
• View Recommended Maintenance Products
• View Installation with Heat Weld