Rolled Gym Flooring 3/8 Inch 20% Color, Rolled Gym Rubber Floors

1. Custom cut roll lengths over 25 LF per roll
2. Made in the USA
3. Low odor rubber flooring option
4. Install with tape or glue down, dry lay for home installations
5. Color flecks are distributed throughout product & will not wear away
6. Recycled rubber content makes this a green product
7. May contribute to LEED points
8. Non slip when wet, durable resilient rubber surface

This product ships from Wisconsin. 3/8 inch 20% colored fleck rolled rubber floor is purchased by the square foot, in any roll lengths from 25 and longer. One linear foot of material is equal to 4 square feet. The rubber rolls are 4 ft wide. Please indicate your roll lengths needed in the notes portion of the order at checkout.

Use rolled rubber flooring for commercial and home gym floors. This type of resilient rubber flooring in rolls is durable and long lasting. Made from recycled rubber material this flooring is considered a green product and may contribute to LEED points.

Rolled rubber flooring is a popular option in homes, schools and universities for athletic gym floors and weight rooms. Rolled rubber is a great flooring option to protect floors from heavy weights and commercial exercise equipment. Rolled rubber floors provide sound dampening and floor protection. Rolls of rubber flooring are a low cost resilient flooring option.

Made in the USA from recycled rubber content with high quality manufacturing that offers flooring product with a warranty.

Installation:
Rolled rubber floors are relatively easy to install. Lay the rubber rolls on top of any hard flat surface like concrete, ceramic tile, or any smooth, flat surface. Simply unroll the rubber rolls and cut the lengths to fit using a sharp utility knife. Rolled rubber floors are factory cut on the sides with precision, they will lay side-by-side with no gaps. The ends of the rubber rolls are not cut square and will require trimming to fit.

For installation use double sided floor tape or recommended adhesive to a clean, debris free flat surface. When using a tape down installation method, tape around the perimeter of the room and at the seams. Rubber rolls can be dry laid in small installations and for home use.

General Rolled Rubber Flooring Information:
Rolls of rubber flooring are an economical rubber flooring solution professional and home use.

Rolled rubber flooring is stocked and is available in pre-cut lengths of 25 feet and 50 feet lengths in 1/4 inch, 8 mm and 3/8 inch thicknesses, in common 10% color fleck and all black material.

Rolled rubber floors are offered in various colors including; all black, black with 10 percent colored fleck, black with 20 percent color fleck and custom color mixes up to 90 percent color. Custom colors of rolled rubber floors are available. Regrind rolled rubber flooring is an economical flooring option. Confetti color includes color flecks that vary from roll to roll. Regrind rubber material in general is the most affordable rubber floor option.

Rolls of rubber are available in from 2 mm to 1/2 inch thicknesses.

Thickness size tolerance plus or minus .02 inches
4 ft width size tolerance plus or minus 1/4 inch

Rolled rubber floors do not provide good fatigue relief as a flooring product. The material is hard like a car tire and will not provide cushion for aerobic and X type training. For aerobic flooring activities, please see our Aerobic Flooring category page.

Avoid getting rolled rubber flooring products wet. Even thought the material is non-porous, the rubber material can absorb moisture over time when submerged repeatedly or power washed repeatedly. To dry rubber material, it is best to elevate the material off the ground or hand-dry with a shop vacuum.

We offers excellent customer service and has professional and knowledgeable sales staff ready to assist with questions, volume discount quotes and product samples.

Find rubber rolls in all thicknesses and color options at the best pricing. We offers great shipping rates on rolled rubber flooring, as we ship rubber rolls from locations nationwide.

Please Note: Cut lengths for rolled rubber products are provided as a courtesy at no additional cost to customers. In come cases, the manufacturer may provide a cut length within two pieces of material. In other cases, the manufacturer may send material that is over or under the specified linear footage. In all cases, the manufacturer is required to supply the overall amount of material per order. It is common for rolled rubber jobs to have butt seams or cut end seams within one roll or run.