Life Floor Slate Border 3/8 Inch Ramp
Boulevard
Sandstone
Mojave
Top Features for Life Floor Slate Border 3/8 Inch Ramp
Finish edge of Life Floor Slate Tiles.
Life Floor Slate Border 3/8 Inch Ramp will create a custom, finished look for Life Floor Ripple Tiles. When the mat edge is subject to foot traffic, additional safety is provided by the use of edge ramps. When surface heights vary, our transition pieces create safer gradations between Life Floor and the substrate.
This product must be glued down to a cementitious surface that is properly prepared for contact cement adhesive based on the installation instructions. Some installations to a plywood surface are acceptable under certain circumstances, please inquire.
ShippingShips via ground service or shrink wrapped on pallets.
This Product Ships UPS Ground, FedEx Ground and/or Freight.
Please review our shipping disclaimer.
SPECIFICATIONS⌃ Back to top
| SKU# | T11-95 |
| In Stock | Yes |
| Material Type | Rubber Foam Blend |
| Product Edging | Straight |
| Thickness | 3/8 inch |
| Width | 0.25 feet |
| Length | 1.98 feet |
| SF per Item | 0.47 |
| Weight | 0.20 lbs |
| Packaging | Cartons |
| Number of Pieces per Package Type | 50 |
| Non Absorbent | Yes |
| Special Adhesives | Yes |
| Interlock Loss | 0.00 feet |
| Interlocking Connections | No |
| Made In | USA |
| Order Minimum | 1 |
| Surface Finish | Slate |
| Surface Design | Solid color |
| Installation Method | Glue down |
| UV Treated | Yes |
| Reversible | No |
| Border Strips Included | No |
| Manufacturer Warranty | 5 year limited |
VIDEOS⌃ Back to top
Q & A⌃ Back to top