Vinyl Peel & Stick Slate Floor Tile 12x12in 36/Carton

Top Features for Vinyl Peel and Stick Slate Floor Tile 12x12 In. 36 per Carton

1. Easy installion with peel and stick backing
2. Very resistant to moisture
3. Will not expand like laminate due to moisture
4. Cost effective commercial grade vinyl flooring solution
5. No adhesive required
6. Install anywhere on any hard flat surface
7. Wear resistant surface
8. Available in a variety of design finishes

Self Adhesive Floor Tiles With Slate Finish

A designer slate floor looks amazing in a kitchen, bathroom, dining room, or entryway. However, the installation process can be significantly time-consuming. Our Slate Finish Self Adhesive Floor Tiles deliver an easy-to-use type of luxury vinyl tile that saves money without sacrificing the beauty of the floor.

The slate-style LVT will work for any room in the home. It can go directly over the top of concrete, existing laminate, or plywood subflooring material.

The slate pattern printed on the top of the vinyl self adhesive floor tiles uses multiple colors in a random pattern of natural swirls to deliver a realistic looking final result.

Ease of Installation of Self Stick Square Tiles

When seeking a flooring product that’s easy to install, it’s tough to beat self stick LVT tiles. With each tile measuring 1-by-1-foot in a square shape, the tiles will lay adjacent to each other, forming perfectly straight lines.

This greatly simplifies installation versus trying to figure out a complex pattern of tiles with odd angles or tricky spacing between tiles required.

Because of the random pattern printed across the top layer of the vinyl tiles, installers don’t have to worry about aligning the grain. Each tile in the carton has a slightly different color pattern to it, which simplifies the process of generating a random finished look.

With the adhesive pre-applied to the back of the self adhesive floor tiles at the factory, installers don’t need to attempt to add messy glue to the subfloor either.

The pre-applied adhesive is extremely sticky, ensuring it will stay in place for years to come.

Each tile weighs only about 1.5 pounds, which makes it easy to handle and maneuver into place for a single person. There’s no need to hire a professional to do the work.

Generally, these tiles will adhere to almost any type of subfloor without the need for special preparation on the part of the installer. However, if the tiles ship with specific instructions for setting up the subfloor, the installer should follow those instructions.

When doing a wall-to-wall installation in a room, start in one corner with a full tile. When the row of tiles reaches a wall or another barrier, simply use a utility knife or heavy duty scissors to cut the tile to fit. At only 3 mm in thickness, it’s easy to cut these thin tiles accurately.

Leave the protective backing layer over the top of the adhesive while making cuts. It can be difficult to handle the tile while making a cut with the adhesive layer exposed, as the installer’s skin may make contact with the adhesive.

Once the installer removes the protective backing and exposes the adhesive, immediately lay the tiles in place. The adhesive grips tightly as soon as it makes contact with the subfloor. It is difficult to readjust the position of the tile after this.

Realistic Looking Slate Self Adhesive Floor Tiles

It’s easy to add a sense of richness or warmth to any room in the house with these slate-style vinyl squares. The beautiful reds and tans, mixed with swirls of darker colors, create a feeling of real slate.

Stone floors always add to the value of a home, but they’re also extremely expensive. Installers can achieve an almost identical look to pricey slate with our vinyl tiles that cost less than $2 per square foot. These tiles don’t require the cost of a professional install, either.

Long Lasting Luxury Vinyl Tiles

This flooring is highly durable, as it carries a 5-year limited manufacturer’s warranty. Even after a few years of use, it will continue to carry the same basic look and feel that it had at the time of installation.

It uses a commercial-grade vinyl material, which means it can stand up to high traffic areas extremely well. It works in an office building where looks and durability are equally important.

Because of its water-resistant nature, it doesn’t falter when exposed to tracked-in rain and snow in an entryway. It also can stand up to areas of the home or business where spills and leaks are possible, such as a laundry room, bathroom, employee break room, or kitchen.

Slate Vinyl Flooring Squares Specifications

• Dimensions: 12 by 12 inches
  
• Thickness: 3 mm (about 0.12 inches)
  
• Material: Vinyl
  
• Coverage per carton: 36 square feet
  
• Pieces per carton: 36
  
• Surface finish: Textured

Maintenance and Care

Beyond looking great, these self adhesive floor tiles are extremely easy to clean and maintain.

Start by sweeping the flooring with a broom to remove any dry debris. Homeowners can use a dust mop across the floor as well for day-to-day cleaning.

Because the 12x12 vinyl squares are naturally water resistant, use a damp mop with water and any common household flooring cleaning product for stubborn stains.

Cheap laminate floorings often will expand and separate when exposed to the effects of dampness and standing water. This vinyl performs far better in an area where moisture may be a concern.

Maintenance

Damp mop as need with common household floor cleaner.

Shipping

Ships ground service to your door or freight delivery shrink wrapped on pallets for larger orders.

This Product Ships Freight Only.
Please review ourshipping disclaimer.

Ask a question

Product Questions: