Patio Outdoor Rubber Tile
Patio paver rubber outdoor tiles are made from 100% recycled rubber, these rubber patio paver tiles take only minutes to install for years of maintenance-free beauty. Be your own landscape architect with these reversible patio pavers tiles. Choose from a brick or architectural pattern.
- Long-lasting and durable
- Will not freeze or crack
- Grooved bottom channels water off of surface
- Made in USA
- Available in: red and brown
- 16 x 16 x 3/4 inch tile size
Patio Paver Outdoor Rubber Tile Installation Instructions:
1. Thoroughly clean the surface where the patio pavers are to be installed. Allow to dry completely. Make sure that both paver and surface have no moisture on them for best adhesion.
2. Place Patio Paver tiles on the surface to assure you have the proper amount and that you like the overall design.
3. To achieve the best results, snap chalk lines as a guide and patio paver tiles will be straight during installation.
4. Begin installation in a corner or against a wall and work in small section.
5. Apply a polyurethane adhesive to the bottom of the paver and place on surface.
6. Gently tap tiles into place with a rubber mallet for adhesion.
7. Continue laying full pavers in place until complete.
8. For any pavers that require cutting, use a razor knife, cutting the paver in a series of scores to acquire a clean edge.
9. Allow area to dry for a minimum of 24 hours before use.
10. After installation some natural weathering of pavers may occur.
Note: If attaching pavers to a wood surface you may also use a one-inch staple in place of polyurethane adhesive.
NOTE: This item is a custom order and is not returnable.
This Product Ships Freight Only.
Please review our shipping disclaimer.
|Interlock Loss||0.00 feet|
|Border Strips Included||No|