4x6 Ft x 3/8 Inch Gym Rubber Floor Mats Black
Durable cost effective 4x6 ft rubber mats for athletic, equine and industrial applications. Easy to install side by side with no glue needed. Use these rubber mats in any thickness for a tough and rugid rubber floor option. Rubber mats in 3/8 inch thickness in 100% black.
Choose this rubber floor mat for home gyms and commercial athletic facilities. 5 mat minimum order. Ships via freight delivery. This rubber floor mat is 100 percent black in color and is 4x6 ft in size and 3/8 inch thick.
This Product Ships Freight and/or FedEx Ground.
Please review our shipping disclaimer.
Material: SBR bonded granular black recycled rubber and polymer binding agents
Thickness / Weight (nominal): 3/8 inch (2.0 lbs. / sq. ft.)
Country of Manufacture: USA
Edge Type: Straight edge
Ordering Minimum: 10 mat minimum order
UV Treated: No
Non - Porous: Both sides non-porous
Ships Out From Warehouse: 2 to 3 business days
Warranty: 5 Years
Installation: Loose lay on smooth, flat surface
Special Adhesives: No adhesive required
Top Texture: Flat one side, Anti-Skid, wire mesh texture surface on opposite side
Density: ASTM D 3676: 60 lbs/ft3
Tensile Strength: ASTM D 412: Minimum 300 psi
Ultimate Elongation: ASTM D 412 on 1/8 inch, 80% minimum
Hardness: ASTM D 2240: Shore A 60 + / - 5
Coefficient of Friction: ASTM D 1894: 0.960
Flammability: Passes Federal Flammability Standard Doc FF 1-70 CPSC
Flame Spread: (UL 94 Standard, Horizontal Burning Test for Classifying Material 694HB) 0.495 inch/MIN on 3/4 inch thick mat
Dimensional Stability: +0.242% at two hours @ 60 degrees C. -0.092% at 48 hours @ 20 degrees C & 65% Rel. Humidity
Critical Radiant Flux: ASTM E648-94a: 0.11 watts/sq. cm
Thermal Resistance: R-Value 0.36
Thermal Resistivity: .72
Thermal Conductivity: K-Value 1.39
Tear Resistance (ppi): ASTM D624: 150,
Compression & Recovery: ASTM D575: Immediate 98.1%. After 24 hours 99.2%. After 48 hours 99.4%. After 72 hours 99.7%. After 96 hours 99.7%.
Accelerated Weathering (Carbon Arc Weatherometer): Fed-Std-191 Method 5804 except with filters removed for the test.
Tensile, psi: Unexposed: 499, Full Exposure: 344
Elongation, %: Unexposed: 145, Full Exposure: 70
|Border Strips Included||No|