Max Playground Rubber Tile 2.5 inch Green
Calculate Tile Count
- ASTM fall height rated for 6 ft
- Multiple thicknesses & color concentrations
- Superior UV fade resistance
- FloorScore certified for indoor applications
- Non glue down installation option for rooftops
- 15 year warranty
- Made in the USA
- Allows water drainage around and under tiles
Playground Safety Surfacing Tiles, Playground Flooring, Outdoor Patios Decks, Rooftop Flooring, Outdoor Rubber Tiles
No playground is complete without Max Playground Rubber Tile 2.5 inch Green to cushion falls and stumbles. Made from 100% recycled rubber, MAX Playground Safety Surface is designed exclusively to reduce the risk of serious injury associated with falls from playground equipment. This tiles offers a 6 ft fall height rating.
Max Playground 2.5 inch Green is available in a 6 ft fall height rated playground safety surfacing rubber tile and is available in several colors. Our pigmented color line of MAX Playground Safety Surface is an excellent outdoor playground safety surface and rooftop rubber tile choice. It offers value, various color choices, ease of installation and maintenance, and proven durability. Install on hard flat prepared surfaces for playgrounds and on top of rooftops for patios and decks. Additional color options are available with the Max Playground Daybright colors.
The pigmented color line of MAX Playground Surfacing is available with a 6 ft fall height rating. The 24 x 24 inch modular tiles are designed and thoroughly tested to withstand years of vigorous play.
MAX Playground Surfacing Tiles can be installed using a variety of installation methods. The most common and secure method is full adhesion of tiles and accessories to the substrates using our one part polyurethane adhesive.
For rooftop and specialty applications, we recommend our exclusive fastening system called Quad Blok. It offers added stability and ease of installation and maintenance. Tiles are adhered to the Quad Blok connector eliminating any potential damage to the roof membrane. Replacing individual tiles and securing a strong, tight-fitting system is a snap with Quad Blok. Please refer to the Quad Blok product page for additional information.
Glue down installation coverage is approximately 70 sq/ft on concrete, 60 sq/ft on asphalt and 55 sq/ft on protective fabric (1/8 inch square notched trowel). Please refer to installations instructions regarding acceptable substrate surfaces and complete installation instructions.
Made in the U.S.A.
American jobs - U.S. economic contribution
15 year warranty
Guaranteed satisfaction & quality assurance
A large selection of color options
Versatile design & easy coordination
Custom color & logo capabilities
Limitless design possibilities & personalized themes for interactive play
Quad Blok installation system
Minimal installation time, saving money
Easy to repair/replace damaged tiles
Environmental contribution & LEED benefits
Tested for critical fall ratings
Superior injury protection & reduced financial risk for claim liability
FloorScore certified for indoor applications
Health promotion & LEED benefits
Support for all levels of physical ability & community responsive considerations
Long life-span for low overall life-cycle costs
Simple daily maintenance
Easy up-keep for low maintenance & labor costs
Factory molded design
Unmatched under-foot support & no flaking, peeling, or chipping of surface patterns
Superior injury protection & high safety ratings
Superior UV fade resistance
Indoor/outdoor compatible & long-lasting vibrancy
Third-party endorsed for safety; Reliable industry support for product performance
Recognized environmental impact; Increased community support
Multiple thicknesses & color concentrations
Budget options; Application versatility
A few things to be aware of. This material CAN NOT be installed on top of dirt. It does require a flat hard surface such as concrete, asphalt, decking or if you have dirt then a base of crushed stone that is compacted and leveled is required. For outdoor installations on dirt and over grass consider our Staylock Perforated modular tiles.
Ships via freight delivery, shrink wrapped on pallets
This Product Ships Freight Only.
Please review our shipping disclaimer.
SPECIFICATIONS⌃ Back to top
|SF per Item||4.00|
|Packaging||Shrink Wrapped on Pallets|
|Number of Pieces per Package Type||50|
|Interlock Loss||0.00 feet|
|Material Density||Shore A 60|
|Surface Finish||Shredded rubber buffings|
|Surface Design||Solid color|
|Installation Method||Glue Down or Quad Blok|
|Border Strips Included||No|
|Manufacturer Warranty||15 year limited|
You will need Adobe® Acrobat® Reader to view PDF documents. Download a free copy from the Adobe Web site.
Q & A⌃ Back to top
Hi I have this product. The mats are about 10 years old and have been outside exposed to sun. The red color has now turned to black and is very course. I am looking at moving them inside to cover my garage floor for a home gym. Is it normal for these to blacken? Is there any way to restore the surface so it is a bit softer?